PAK1833.0107
Indexing plunger with locking guide pin, With latching groove with lock nut D1=M12X1, 5, D=7, Style B
Estimated delivery: On request
Indexing plungers are used to prevent changes in the engagement position caused by transverse forces.
If the locking marking is visible, the pin is fully unlocked or only partially engaged.
Material:
Housing and pin in steel.
Locking marking and adhesive label in aluminium.
PA (polyamide) thermoplastic rotary knob.
Version:
Nickel-plated housing and pin.
Locking marking anodised, red.
Glass-fibre-reinforced rotary knob, black.
Scope of delivery:
The lock nut and the adhesive label with a thickness of 0,2 mm are included in the delivery.
Accessories:
Bush K1835.
Drawing note:
1) Mounting without bush K1835
2) Screw-on plate
3) Base plate
4) Locking mark
5) ON position
6) OFF position
7) Adhesive label
If the locking marking is visible, the pin is fully unlocked or only partially engaged.
Material:
Housing and pin in steel.
Locking marking and adhesive label in aluminium.
PA (polyamide) thermoplastic rotary knob.
Version:
Nickel-plated housing and pin.
Locking marking anodised, red.
Glass-fibre-reinforced rotary knob, black.
Scope of delivery:
The lock nut and the adhesive label with a thickness of 0,2 mm are included in the delivery.
Accessories:
Bush K1835.
Drawing note:
1) Mounting without bush K1835
2) Screw-on plate
3) Base plate
4) Locking mark
5) ON position
6) OFF position
7) Adhesive label
| Material | Steel |
|---|---|
| Finishing | Nickel plated |
| Thread | M12 x 1.5 |
| L4 | 17 |
|---|---|
| SW2 | 19 |
| L | 57 |
| D | 7 |
| T | 9-11 |
| L2 | 20 |
| L5 | 52 |
| SW1 | 14 |
| D3 | 32 |
| Força de aperto N | 170 |
| Constância térmica | 80 °C |
| D2 | 4,9 |
| Curso S | 5 |
| L1 | 58 |
| D4 | 5,3-6,6 |
| D1 | M12x1,5 |
| L3 | 8 |
| Cor dos componentes | preto |
| Forma | B |
| Versão 2 | com ranhura de engate |
| Versão 1 | com pino guia de bloqueio cónico |
| Material dos componentes | poliamida |
| Denominação | Pino de indexação |
| Cisalhamento kN | 1,3 |
| Tipo de produto | com acionamento por rotação |
| Contraporca | com contraporca |
| Tipo de forma | com posição intermédia |
| F | 9 |
