PAK1213.122061
Indexing plunger with locking TA.2 M12X1, 5, D=6, Style B without latching groove with lock nut, Non-hardened stainless steel
Estimated delivery: On request
Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. It can only be moved to another locking position after the pin has been disengaged manually.
Locking is achieved by actuating the push button.
The red release button allows the locking position to be changed.
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.
Stainless steel version:
Threaded bush and locking guide pin 1.4305.
Thermoplastic mushroom head.
Thermoplastic release button.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Unhardened, polished guide pin for locking, untreated surface.
Dark grey mushroom head RAL 7021.
Red release button.
On request:
Special versions.
Locking is achieved by actuating the push button.
The red release button allows the locking position to be changed.
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.
Stainless steel version:
Threaded bush and locking guide pin 1.4305.
Thermoplastic mushroom head.
Thermoplastic release button.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Unhardened, polished guide pin for locking, untreated surface.
Dark grey mushroom head RAL 7021.
Red release button.
On request:
Special versions.
| Material | Stainless steel |
|---|---|
| Finishing | Unhardened |
| Thread | M12 x 1.5 |
| Tamanho | 2 |
|---|---|
| Forma | B |
| Versão 1 | sem ranhura de engate |
| Material dos componentes | termoplástico |
| Denominação | Pino de indexação |
| L2 | 8 |
| D1 | M12x1,5 |
| SW2 | 19 |
| F x 30° | 1,8 |
| D2 | 25 |
| D | 6 |
| L | 55,5 |
| L1 | 20 |
| Força restauradora N | 4-12 |
| L3 | 17 |
| SW1 | 14 |
| Cor dos componentes | grafite RAL 7021 |
| Tipo de produto | com bloqueio |
| Chave de aço | 1.4305 |
| Curso S | 6 |
| Tipo de forma | sem ranhura de engate com contraporca |
| Contraporca | com contraporca |
| Versão 2 | com bloqueio |
