PAK1149.71105
Indexing plunger with marking ring TA.1 D1=M10X1, D=5, Style A without latching groove without lock nut, Steel part
Estimated delivery: On request
Indexing plungers are used to prevent changes in the engagement position caused by transverse forces. Only after the pin has been withdrawn manually is it possible to move to another latching position.
If the marking is visible, the screw is fully unlocked or only partially engaged.
Material:
Threaded bush and locking guide pin in free-cutting steel.
Mushroom-head knob in thermoplastic.
Locking marking in aluminium.
Version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Dark grey mushroom head RAL7021.
Locking marking anodised in red.
On request:
Special versions.
Accessories:
Spacer rings K0665.
Clamping kits for thin-walled parts K2146.
Drawing note:
1) Marking ring
If the marking is visible, the screw is fully unlocked or only partially engaged.
Material:
Threaded bush and locking guide pin in free-cutting steel.
Mushroom-head knob in thermoplastic.
Locking marking in aluminium.
Version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Dark grey mushroom head RAL7021.
Locking marking anodised in red.
On request:
Special versions.
Accessories:
Spacer rings K0665.
Clamping kits for thin-walled parts K2146.
Drawing note:
1) Marking ring
| Material | Steel |
|---|---|
| Finishing | Hardened |
| Thread | M10 x 1 |
| Tamanho | 1 |
|---|---|
| Forma | A |
| Versão 2 | com anel de marcação |
| Versão 1 | sem ranhura de engate |
| Material dos componentes | termoplástico |
| Denominação | Pino de indexação |
| L2 | 7 |
| D1 | M10x1 |
| Força de mola inicial F1 aprox. N | 5 |
| Força de mola final F2 aprox. N | 12 |
| F x 30° | 1,3 |
| D2 | 21 |
| D | 5 |
| L | 43,5 |
| L1 | 17 |
| L3 | 15 |
| SW1 | 13 |
| Tipo de produto | com marcação de bloqueio |
| Curso S | 5 |
| Contraporca | sem contraporca |
