Indexing plunger with status sensor, Cable-connected, PNP normally open contact, TA.4, M20X1, 5, D=12

Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. It is only possible to move to another locking position after the pin has been disengaged manually.
If the disengagement is carried out over a longer period of time and the guided locking pin must not return, form C or form D should be used.

The actuation status of the indexing plunger with condition sensor can be recorded electronically and processed further.
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.

Stainless steel version:
Threaded bush 1.4305.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking $s14035..

Thermoplastic mushroom head.

Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.

Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened, polished guide pin for locking, untreated surface.

Mushroom-head knob in black thermoplastic, grey RAL7021.
Note:
The condition monitoring sensor switches when it engages at a stroke of S - 1 mm.
Application:
Indexing plungers with condition sensor enable operation-dependent process control. In addition, it is possible to ensure that the locking guide pin is in the desired operating state.
On request:
Special versions.
Technical data:
Inductive sensor:
Output circuit: PNP normally open contact (NO)
Operating voltage: 6 - 30 V DC
Operating current: <100 mA
Operating distance: 1 mm
Switching frequency: <4000 Hz
Short-circuit protection: yes
Reverse polarity protection: yes
Protection class: IP 67
Connection type: PVC cable, 2 m, PUR, with plug connector
Temperature range: -10° C - +70°C
Approval: CE, c-UL-us, EAC
Drawing note:
Form A: without locking groove, without lock nut
Form B: without locking groove, with lock nut
Form C: with locking groove, without lock nut
Form D: with locking groove, with lock nut

P = Cable length

BN = brown
BK = black
BU = blue