PAK0347.11206
Indexing plunger without collar TA.2, D1=14, D=6, L=56, Form L without latching groove, Non-hardened stainless steel
Estimated delivery: On request
Material:
Steel version:
Bush 1.0403.
Guide pin for locking, high-speed steel.
Bush 1.4301.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking 1.4305.
Thermoplastic mushroom head.
Version:
Steel version:
burnished bush, weldable.
Hardened, polished and burnished guide pin for locking.
Stainless steel version: bush with untreated surface, weldable.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Mushroom-head knob in dark grey RAL7021.
Note:
If the indexing plunger is welded in, the bush should be staked so that the spring is not thermally damaged by higher temperatures.
On request:
Special versions.
Steel version:
Bush 1.0403.
Guide pin for locking, high-speed steel.
Bush 1.4301.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking 1.4305.
Thermoplastic mushroom head.
Version:
Steel version:
burnished bush, weldable.
Hardened, polished and burnished guide pin for locking.
Stainless steel version: bush with untreated surface, weldable.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Mushroom-head knob in dark grey RAL7021.
Note:
If the indexing plunger is welded in, the bush should be staked so that the spring is not thermally damaged by higher temperatures.
On request:
Special versions.
| Material | Stainless steel |
|---|---|
| Finishing | Unhardened |
| D2 | 25 |
|---|---|
| L | 56 |
| Força de mola inicial F1 aprox. N | 6 |
| D1 | 14 |
| D | 6 |
| L1 | 28 |
| Força de mola final F2 aprox. N | 14 |
| F x 30° | 1,8 |
| Tamanho | 2 |
| Forma | L |
| Material dos componentes | termoplástico |
| Denominação | Pino de indexação |
| Cor dos componentes | grafite RAL 7021 |
| Versão 1 | sem ranhura de engate |
| Tipo de produto | sem colar |
| Chave de aço | 1.4305 |
| Curso S | 6 |
| Contraporca | sem contraporca |
