Indexing plunger without collar TA.3, D1=18, D=8, L=72, Form V with key ring without latching groove, Steel part

Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. It can only be moved to another locking position after the pin has been disengaged manually.

The key ring allows the indexing plunger to be actuated automatically (program-controlled), for example with the aid of a pneumatic cylinder, or allows remote actuation by means of Bowden cables.
Material:
Steel version:
Hardened guide pin for locking:
Weldable bush 1.0403.
Guide pin for locking with strength class 5.8.

Stainless steel version:
Hardened guide pin for locking:
Weldable bush 1.4301.
Guide pin for locking 1.4034.

Unhardened guide pin for locking:
Weldable bush 1.4301.
Guide pin for locking 1.4305.

Ring spanner end 1.4310, untreated surface.

Version:
Steel version:
Weldable burnished bush.
Hardened, polished and burnished guide pin for locking.

Stainless steel version: bush with untreated surface, weldable.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.

Ring spanner end with untreated surface.
Order example:
K0636.4206
Note:
If the indexing plunger is welded in, the bush should be staked so that the spring is not thermally damaged by higher temperatures.
On request:
Special versions.