PAK0345.11105
Indexing plunger without collar without latching groove TA.1 D1=M10X1, D=5, Style J, With threaded stud without lock nut, Steel
Estimated delivery: On request
Material:
Steel design:
Threaded bush and locking pin in free-cutting steel.
Stainless steel version:
Threaded bush 1.4305.
Hardened locking pin 1.4034..
Unhardened locking pin 1.4305
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened, polished guide pin for locking, untreated surface.
Note:
A support disc can be supplied for screwing the indexing plungers. It must be placed on the threaded bush so that the driver pins enter the slot.
On request:
Special versions.
Accessories:
Spacer rings K0665.
Clamping kits for thin-walled parts K2146.
Steel design:
Threaded bush and locking pin in free-cutting steel.
Stainless steel version:
Threaded bush 1.4305.
Hardened locking pin 1.4034..
Unhardened locking pin 1.4305
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened, polished guide pin for locking, untreated surface.
Note:
A support disc can be supplied for screwing the indexing plungers. It must be placed on the threaded bush so that the driver pins enter the slot.
On request:
Special versions.
Accessories:
Spacer rings K0665.
Clamping kits for thin-walled parts K2146.
| Material | Stainless steel |
|---|---|
| Finishing | Unhardened |
| Thread | M10 x 1 |
| Força de mola inicial F1 aprox. N | 5 |
|---|---|
| L1 | 24 |
| L2 | 8 |
| L | 37 |
| D | 5 |
| F x 30° | 1,3 |
| D1 | M10x1 |
| D2 | M4 |
| Força de mola final F2 aprox. N | 12 |
| Tamanho | 1 |
| Forma | J |
| Denominação | Pino de indexação |
| Versão 1 | sem ranhura de engate |
| Tipo de produto | sem colar |
| Chave de aço | 1.4305 |
| Curso S | 5 |
| Versão 2 | com pino roscado |
| Contraporca | sem contraporca |
