PAK0344.2105
Indexing plunger without latching groove TA.1 D1=M10X1, Form H steel, Hardened, Components: thermoplastic, Graphite RAL7021
Estimated delivery: On request
Material:
Steel design:
Threaded bush and locking pin in free-cutting steel.
Stainless steel version:
Threaded bush 1.4305.
Hardened locking pin 1.4034..
Unhardened locking pin 1.4305.
Mushroom-head knob in thermoplastic
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Mushroom-head knob in dark grey RAL 7021.
Note:
A C-washer for screwing in the indexing plungers can be supplied. It must be positioned under the unlocked mushroom-head knob so that the driver pins enter the slot.
On request:
Special versions.
Steel design:
Threaded bush and locking pin in free-cutting steel.
Stainless steel version:
Threaded bush 1.4305.
Hardened locking pin 1.4034..
Unhardened locking pin 1.4305.
Mushroom-head knob in thermoplastic
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Mushroom-head knob in dark grey RAL 7021.
Note:
A C-washer for screwing in the indexing plungers can be supplied. It must be positioned under the unlocked mushroom-head knob so that the driver pins enter the slot.
On request:
Special versions.
| Material | Steel |
|---|---|
| Finishing | Hardened |
| Thread | M10 x 1 |
| F x 30° | 1,3 |
|---|---|
| Força de mola final F2 aprox. N | 12 |
| D2 | 21 |
| L2 | 18 |
| D | 5 |
| L1 | 24 |
| SW | 17 |
| L | 47 |
| Força de mola inicial F1 aprox. N | 5 |
| D1 | M10x1 |
| Tamanho | 1 |
| Forma | H |
| Versão 2 | endurecido |
| Material dos componentes | termoplástico |
| Denominação | Pino de indexação |
| Cor dos componentes | grafite RAL 7021 |
| Versão 1 | sem ranhura de engate |
| Tipo de produto | sem colar |
| Classe de resistência | 5.8 |
| Curso S | 5 |
| Contraporca | com contraporca |
