PAK0342.03105
Indexing plunger without latching groove TA.1 D1=M10X1, Style R, Hardened stainless steel
Estimated delivery: On request
Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. It can only be moved to another locking position after the pin has been disengaged.
In addition to manual operation, the key ring also allows the connection of elements for remote control, such as a captive safety cable.
If the disengagement has to take place over a longer period of time and the guided locking pin must be prevented from returning, form V or form W should be used.
Material:
Steel version:
threaded bush and locking guide pin in high-speed steel.
Stainless steel version:
threaded bush 1.4305.
hardened locking guide pin 1.4034.
unhardened locking guide pin 1.4305.
Ring spanner end 1.4310.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Ring spanner end with untreated surface.
On request:
Special versions.
In addition to manual operation, the key ring also allows the connection of elements for remote control, such as a captive safety cable.
If the disengagement has to take place over a longer period of time and the guided locking pin must be prevented from returning, form V or form W should be used.
Material:
Steel version:
threaded bush and locking guide pin in high-speed steel.
Stainless steel version:
threaded bush 1.4305.
hardened locking guide pin 1.4034.
unhardened locking guide pin 1.4305.
Ring spanner end 1.4310.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Ring spanner end with untreated surface.
On request:
Special versions.
| Material | Stainless steel |
|---|---|
| Finishing | Hardened |
| Thread | M10 x 1 |
| L1 | 17 |
|---|---|
| D1 | M10x1 |
| D4 | 23 |
| D | 5 |
| Força de mola inicial F1 aprox. N | 5 |
| Força de mola final F2 aprox. N | 12 |
| L4 | 15 |
| F x 30° | 1,3 |
| SW1 | 13 |
| L2 | 7 |
| Tamanho | 1 |
| Forma | R |
| Denominação | Pino de indexação |
| L | 52 |
| Versão 1 | sem ranhura de engate |
| Tipo de produto | com pino roscado |
| Chave de aço | 1.4034 |
| Curso S | 5 |
| Contraporca | sem contraporca |
