PAK0634.002105
Indexing plunger without latching groove TA.1 M10X1, Style H, Hardened stainless steel, Components: stainless steel
Estimated delivery: On request
Material:
Threaded bush 1.4305.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking 1.4305.
Mushroom head 1.4305.
Version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Finely turned mushroom head. Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Finely turned mushroom head.
Note:
A C-washer for screwing in the indexing plungers can be supplied. It must be positioned under the unlocked mushroom-head knob so that the driver pins enter the slot.
On request:
Special versions.
Threaded bush 1.4305.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking 1.4305.
Mushroom head 1.4305.
Version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Finely turned mushroom head. Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Finely turned mushroom head.
Note:
A C-washer for screwing in the indexing plungers can be supplied. It must be positioned under the unlocked mushroom-head knob so that the driver pins enter the slot.
On request:
Special versions.
| Material | Stainless steel |
|---|---|
| Finishing | Hardened |
| Thread | M10 x 1 |
| F x 30° | 1,3 |
|---|---|
| Força de mola inicial F1 aprox. N | 5 |
| SW | 17 |
| L1 | 24 |
| L | 50 |
| L2 | 21 |
| D | 5 |
| D1 | M10x1 |
| D2 | 21 |
| Força de mola final F2 aprox. N | 12 |
| Tamanho | 1 |
| Forma | H |
| Denominação | Pino de indexação |
| Material dos componentes | aço inoxidável |
| Versão 1 | sem ranhura de engate |
| Tipo de produto | sem colar |
| Chave de aço | 1.4034 |
| Curso S | 5 |
| Contraporca | com contraporca |
