Internal hinge style B, Galvanised zinc, Variant 1, S=2, 2-2, 7, Steel

Swivel hinges are generally used for functional or visual reasons. The hinge is mounted on the inside of the door and frame and is only visible when the door is open.
Material:
Door part, zinc die-cast, steel or stainless steel 1.4401.
Frame part, zinc die-cast or stainless steel 1.4401.
Pin, steel or stainless steel 1.4305.
Clamping clip in sintered metal or stainless steel.
NBR O-ring.
POM bearing bushes.

Version:
Door part, zinc die-cast and zinc-plated steel.
Frame part, zinc die-cast, untreated.
Steel pin, zinc-plated.
Clamping clip in sintered metal, coated.
Door part, frame part, pin and retaining clip, stainless steel, untreated surface.
Black O-ring.
Note:
For overlay doors.
The hidden hinge.
Chamfer of 23 mm.
Can be mounted on the right or left.
Opening angle of 130°.
Screw-on door part.
Tool-free mounting of the frame part.
The pin is pre-assembled in a self-locking manner and without risk of loss.
The pin closes onto the wire springs attached to the frame section and is thus secured.
Adjustable door part +/-5 mm, can be hung by pulling the pin back.
IP65 in accordance with DIN EN 60529.
Form B: tool-free door installation, simply by snapping it into the frame section.

Product type:
- Variant 1: left door, upper pin, right door, lower pin
- Variant 2: right door, upper pin, left door, lower pin
Application:
- Machine and apparatus engineering
- Distribution cabinets and control cabinets
- Medical and laboratory technology
- Conveyor and transport systems
Drawing note:
1) Chamfering
2) Bearing bush
3) Door cut-out
4) Weld pin (form A and form C = M8x15, form B = M6x12)