PAK1672.051016
Latch, D=10, M16, Style B with threaded bush/nut, Burnished steel
Estimated delivery: On request
Latches are used to prevent changes in the engagement position, caused by transverse forces. When the latch is turned by 180°, the locking guide pin retracts, thus allowing the engagement position to be changed. The detent notch causes the latch to be held in this position, so that the locking guide pin remains retracted.
Material:
Latch 1.0503.
Threaded bush and guide pin in free-cutting steel.
Compression spring 1.4310.
Version:
Burnished threaded bush and latch.
Guide pin for locking, hardened, polished and burnished.
Compression spring with untreated surface.
Advantages:
When the latch is turned by 180°, the locking guide pin retracts.
Mounting above the external thread.
On request:
Special versions.
Accessories:
Retaining part K0638.
Locating bushes K1290, K1839, K1840.
Material:
Latch 1.0503.
Threaded bush and guide pin in free-cutting steel.
Compression spring 1.4310.
Version:
Burnished threaded bush and latch.
Guide pin for locking, hardened, polished and burnished.
Compression spring with untreated surface.
Advantages:
When the latch is turned by 180°, the locking guide pin retracts.
Mounting above the external thread.
On request:
Special versions.
Accessories:
Retaining part K0638.
Locating bushes K1290, K1839, K1840.
| Material | Steel |
|---|---|
| Finishing | Burnished |
| F x 30° | 2,8 |
|---|---|
| Força de mola final F2 aprox. N | 35 |
| Força de mola inicial F1 aprox. N | 15 |
| L | 61,2 |
| H | 10 |
| B1 | 4,8 |
| D | 10 |
| D2 | 16 |
| L1 | 40 |
| D1 | M16 |
| B | 14,4 |
| L3 | 32 |
| Forma | B |
| Denominação | Trinco |
| Contraporca | com contraporca |
| Tipo de forma | com casquilho roscado, com porca |
| SW | 24 |
