PAK1113.87401
Latch, long version, Triangle 7 mm, H=40, Chrome-plated zinc die-cast
Estimated delivery: On request
Material:
Housing and actuator in zinc die-cast.
Version:
Chrome-plated housing and actuator.
Order example:
Cam latch K1113.18301
Latch tongue K1114.145X040
Note:
Protection class IP65 is achieved by means of an additional O-ring located beneath the drive, as well as a flat sealing ring applied to the housing. The tongue latch can be installed pre-assembled.
Order the tongues separately in the desired version. All tongues are compatible with this housing model.
*Dimension A results from the combination of tongue latch and tongue and is shown on the corresponding tongues.
Accessories:
Special wrench K0535.
Latch tongue for tongue latch in steel K1114.
Drawing note:
Drive:
a) Square profile of 8 mm
b) Slot
c) Double bit of 3 mm
d) Triangular profile of 7 mm
Housing and actuator in zinc die-cast.
Version:
Chrome-plated housing and actuator.
Order example:
Cam latch K1113.18301
Latch tongue K1114.145X040
Note:
Protection class IP65 is achieved by means of an additional O-ring located beneath the drive, as well as a flat sealing ring applied to the housing. The tongue latch can be installed pre-assembled.
Order the tongues separately in the desired version. All tongues are compatible with this housing model.
*Dimension A results from the combination of tongue latch and tongue and is shown on the corresponding tongues.
Accessories:
Special wrench K0535.
Latch tongue for tongue latch in steel K1114.
Drawing note:
Drive:
a) Square profile of 8 mm
b) Slot
c) Double bit of 3 mm
d) Triangular profile of 7 mm
| Material | Zamak |
|---|---|
| Finishing | Chromed |
| SW | 27 |
|---|---|
| H | 40 |
| S | 18 |
| Versão 1 | versão longa |
| Denominação | Fecho de lingueta |
| Acionamento | Triângulo 7 mm |
