Latch smooth version, D=8, D1=12, Style E with bush, Smooth, Burnished steel

Latches are used to prevent changes in the engagement position, caused by transverse forces. When the latch is turned by 180°, the locking guide pin retracts, thus allowing the engagement position to be changed. The detent notch causes the latch to be held in this position, so that the locking guide pin remains retracted.
Material:
Latch 1.0503.
Bush 1.0403.
Locking guide pin, free-cutting steel.
Compression spring 1.4310.
Version:
Burnished bush and latch.
Guide pin for locking, hardened, polished and burnished.
Compression spring with untreated surface.
Note:
If the latches are welded, the bush must be tack-welded so that the spring is not thermally damaged by the high temperatures.
Advantages:
When the latch is turned by 180°, the locking guide pin retracts.
Plain bush, connection option above push-in sleeve.
On request:
Special versions.
Accessories:
Locating bushes K1290, K1839, K1840.