PAK0527.17401
Latch with domed tongue, Zinc square 7 mm, L=40
Estimated delivery: On request
Material:
Housing, actuator, nut and tongue in zinc die-cast.
Flat sealing ring made of rubber.
Version:
Chrome-plated housing, actuator, nut and tongue.
Order example:
Cam latch K0527.17301
Note:
Cam latches with arched cam are used predominantly on doors and housings that require a high sealing pressure. Can be used on the right or left. The closing stroke is always performed clockwise. When the drive is turned clockwise, the clamping stroke increases gradually by up to 9,5 mm with a maximum rotation angle of 270°.
The fixing nut is applied on one side as an earthing nut with claws.
Protected against water and dust according to IP65.
Accessories:
Socket wrench K0535
Drawing note:
Drive (core):
a) Square 7 mm
b) Double bit 3 mm
c) Double bit 5 mm
1) O-ring
2) Adapter
Housing, actuator, nut and tongue in zinc die-cast.
Flat sealing ring made of rubber.
Version:
Chrome-plated housing, actuator, nut and tongue.
Order example:
Cam latch K0527.17301
Note:
Cam latches with arched cam are used predominantly on doors and housings that require a high sealing pressure. Can be used on the right or left. The closing stroke is always performed clockwise. When the drive is turned clockwise, the clamping stroke increases gradually by up to 9,5 mm with a maximum rotation angle of 270°.
The fixing nut is applied on one side as an earthing nut with claws.
Protected against water and dust according to IP65.
Accessories:
Socket wrench K0535
Drawing note:
Drive (core):
a) Square 7 mm
b) Double bit 3 mm
c) Double bit 5 mm
1) O-ring
2) Adapter
| Material | Zamak |
|---|
| A | 40 -9,5 |
|---|---|
| Acionamento | quadrado 7 mm |
| L | 40 |
| S | 30 |
| Versão 1 | com lingueta abaulada |
| Denominação | Fecho de lingueta |
