PAK1679.041220
Latch with hexagon, D=12, M20, SW1=20, Style A, Without cap without lock nut, Burnished steel
Estimated delivery: On request
Latches are used to prevent changes in the engagement position, caused by
transverse forces.
When the latch is turned 180°, the locking guide pin retracts, thus allowing the
the latching position.
The detent notch causes the latch to be held in this position and the pin
remains retracted.
Material:
Latch 1.0503.
Threaded bush and locking guide pin in steel.
Compression spring 1.4310.
Latch cover cap in thermoplastic PA.
Version:
Burnished threaded bush and latch.
Guide pin for locking, hardened, ground and burnished.
Compression spring with untreated surface.
Latch cap in different colours:
- dark grey RAL 7021.
- pure orange RAL 2004.
- rape yellow RAL 1021.
- traffic red RAL 3020.
- safety green RAL 6032.
- traffic blue RAL 5017.
- light grey RAL 7035.
Advantages:
When the latch is turned 180°, the locking guide pin retracts.
Available with coloured plastic latch caps.
Bush with hexagon serving as assembly support.
On request:
Special versions.
Accessories:
Retaining part K0638.
Locating bushes K1290, K1839, K1840.
transverse forces.
When the latch is turned 180°, the locking guide pin retracts, thus allowing the
the latching position.
The detent notch causes the latch to be held in this position and the pin
remains retracted.
Material:
Latch 1.0503.
Threaded bush and locking guide pin in steel.
Compression spring 1.4310.
Latch cover cap in thermoplastic PA.
Version:
Burnished threaded bush and latch.
Guide pin for locking, hardened, ground and burnished.
Compression spring with untreated surface.
Latch cap in different colours:
- dark grey RAL 7021.
- pure orange RAL 2004.
- rape yellow RAL 1021.
- traffic red RAL 3020.
- safety green RAL 6032.
- traffic blue RAL 5017.
- light grey RAL 7035.
Advantages:
When the latch is turned 180°, the locking guide pin retracts.
Available with coloured plastic latch caps.
Bush with hexagon serving as assembly support.
On request:
Special versions.
Accessories:
Retaining part K0638.
Locating bushes K1290, K1839, K1840.
| Material | Steel |
|---|---|
| Finishing | Burnished |
| Thread | M20 |
| F x 30° | 3 |
|---|---|
| Força de mola final F2 aprox. N | 60 |
| Força de mola inicial F1 aprox. N | 20 |
| L | 71 |
| H | 12 |
| B1 | 6 |
| D | 12 |
| SW1 | 20 |
| L1 | 50 |
| D1 | M20 |
| B | 18 |
| L3 | 30 |
| Forma | A |
| Versão 1 | com sextavado |
| Denominação | Trinco |
| Contraporca | sem contraporca |
| Tipo de forma | sem tampa de plástico, sem contraporca |
| D2 | 20 |
