Latch with hexagon, D=6, M16, SW1=16, Style C, With cap without lock nut, Burnished steel, Components: grey thermoplastic

Latches are used to prevent changes in the engagement position, caused by
transverse forces.
When the latch is turned 180°, the locking guide pin retracts, thus allowing the
the latching position.
The detent notch causes the latch to be held in this position and the pin
remains retracted.
Material:
Latch 1.0503.
Threaded bush and locking guide pin in steel.
Compression spring 1.4310.
Latch cover cap in thermoplastic PA.
Version:
Burnished threaded bush and latch.
Guide pin for locking, hardened, ground and burnished.
Compression spring with untreated surface.
Latch cap in different colours:
- dark grey RAL 7021.
- pure orange RAL 2004.
- rape yellow RAL 1021.
- traffic red RAL 3020.
- safety green RAL 6032.
- traffic blue RAL 5017.
- light grey RAL 7035.
Advantages:
When the latch is turned 180°, the locking guide pin retracts.
Available with coloured plastic latch caps.
Bush with hexagon serving as assembly support.
On request:
Special versions.
Accessories:
Retaining part K0638.
Locating bushes K1290, K1839, K1840.