Latch with internal guide, D=8, M16X1, 5, Style C with cap without lock nut, Burnished steel, Components: red thermoplastic

Latches are used to prevent changes in the engagement position, caused by transverse forces. When the latch is turned by 180°, the locking guide pin retracts, thus allowing the engagement position to be changed. The detent notch causes the latch to be held in this position, so that the locking guide pin remains retracted.
Material:
Threaded bush and latch 1.0503.
Locking guide pin, free-cutting steel.
Compression spring 1.4310.
Latch cover cap in thermoplastic PA.
Version:
Burnished threaded bush and latch.
Guide pin for locking, hardened, polished and burnished.
Compression spring with untreated surface.
Latch cap in different colours:
- dark grey RAL 7021
- pure orange RAL 2004
- rape yellow RAL 1021
- traffic red RAL 3020
- safety green RAL 6032
- traffic blue RAL 5017
- light grey RAL 7035
Application:
Due to its closed design, the latch with internal guide mechanism can be installed in heavily contaminated locations, for example with dust and sparks.
Advantages:
- When the latch 180° is turned, the guide pin retracts.
- Its closed design prevents dirt from entering the threaded bush.
- Using the hexagon positioned in the bush, the latch can be mounted easily.
On request:
Special versions.
Accessories:
Retaining part K0638.
Locating bushes K1290.