PAK1284.10710201
Latch with stop, Left-hand, D=10, M20X1, 5, Style D powder-coated handle with P, Steel
Estimated delivery: On request
Material:
Steel, strength class 5.8.
Version:
Burnished part. Hardened and ground guide pin for locking.
Note:
This type of latch is used so that the locking guide pin does not protrude at certain times. When the latch is turned 180°, the guide pin retracts.
A locking notch keeps the latch in this position.
When the stop 180° is locked, the engagement notch is blocked, preventing the indexing plunger from extending again.
The choice of stop side determines the direction of rotation of the latch.
Drawing note:
1) Left-hand stop
2) Right-hand stop
Steel, strength class 5.8.
Version:
Burnished part. Hardened and ground guide pin for locking.
Note:
This type of latch is used so that the locking guide pin does not protrude at certain times. When the latch is turned 180°, the guide pin retracts.
A locking notch keeps the latch in this position.
When the stop 180° is locked, the engagement notch is blocked, preventing the indexing plunger from extending again.
The choice of stop side determines the direction of rotation of the latch.
Drawing note:
1) Left-hand stop
2) Right-hand stop
| Material | Steel |
|---|---|
| Thread | M20 x 1.5 |
| Forma | D |
|---|---|
| Versão 2 | à esquerda |
| Versão 1 | com batente |
| Denominação | Trinco |
| H | 12 |
| B1 | 6 |
| D1 | M20x1,5 |
| Força de mola inicial F1 aprox. N | 20 |
| Força de mola final F2 aprox. N | 60 |
| F x 30° | 2,8 |
| D2 | 20 |
| B | 18 |
| D | 10 |
| L | 70 |
| L3 | 30 |
| SW2 | 30 |
| SW1 | 20 |
| L1 | 50 |
| Tipo de forma | cabo pintado a pó, com porca |
| Contraporca | com contraporca |
