PAK1345.16442525
Lift-off hinge, Left-hand 87X48, Stainless steel A4 highly polished, Components: stainless steel, A1=25, A2=25
Estimated delivery: On request
Material:
Hinge in stainless steel 1.4401.
Shaft in stainless steel 1.4104.
Version:
highly polished part.
Order example:
K1345.16261515
Note:
Hinge for flat elements, panels and aluminium profiles, removable. Shaft closed at the side. Recessed screws, therefore minimal dirt accumulation.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee legal properties.
The load data were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Hinge in stainless steel 1.4401.
Shaft in stainless steel 1.4104.
Version:
highly polished part.
Order example:
K1345.16261515
Note:
Hinge for flat elements, panels and aluminium profiles, removable. Shaft closed at the side. Recessed screws, therefore minimal dirt accumulation.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee legal properties.
The load data were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
| Material | Stainless steel 316 |
|---|---|
| Finishing | High-gloss polished |
| Versão 2 | à esquerda |
|---|---|
| Versão 1 | pendurável |
| Denominação | Dobradiça |
| Chave de aço | 1.4401 |
| A3 | 43,5 |
| A4 | 43,5 |
| H | 16 |
| H1 | 9 |
| D1 | 6,6 |
| A | 87 |
| D2 | 6 |
| A1 | 25 |
| B2 | 28 |
| B3 | 10 |
| A2 | 25 |
| Modo de fixação | furos de fixação |
| B | 48 |
| Tipo de produto | dobradiça pendurável |
| Material dos componentes | aço inoxidável |
| F1 N | 1200 |
| F2 N | 450 |
