PAK2497.2030
Magnetic clamping block 100X25X25, AlNiCo, PT=4
Estimated delivery: On request
Order example:
K2497.2020
Note:
Clamping blocks K2497.2010 to K2497.2030 consist of a permanent magnet system with narrow pole pitch, acting in two or three zones (pole pitch 4 mm). For clamping extremely thin steel workpieces, we recommend the clamping block K2497.2040 with a fine pole pitch of 1,3 mm. The magnetic service life of the clamping blocks under typical industrial manufacturing conditions is unlimited.
Clamping blocks can be ground or polished down to half their height without significant loss of grip.
K2497.2020
Note:
Clamping blocks K2497.2010 to K2497.2030 consist of a permanent magnet system with narrow pole pitch, acting in two or three zones (pole pitch 4 mm). For clamping extremely thin steel workpieces, we recommend the clamping block K2497.2040 with a fine pole pitch of 1,3 mm. The magnetic service life of the clamping blocks under typical industrial manufacturing conditions is unlimited.
Clamping blocks can be ground or polished down to half their height without significant loss of grip.
| Material | Aluminio-Niquel-Cobalto (ALNiCo) |
|---|
| L | 100 |
|---|---|
| H | 25 |
| B | 25 |
| Desvio máx. de ângulo | 10´ |
| Versão 1 | magnético |
| Denominação | Bloco de fixação |
| Superfícies aderentes mm | 2 superfícies 100x25 |
| Divisão de polos | 4 |
| Modo de fixação | sem |
| Superfície dos componentes | sem tratamento superficial |
| N° de UN | 2807 |
| Classe de mercadorias perigosas | classe de mercadorias perigosas 9 |
