Magnetic sensor miniature design 26, 7X15, P=1000, Aluminium red

Material:
Aluminium housing.
Polyurethane cable sheath.
Version:
Compact design of sensor and connector.
Plug-in connector M8, 6-pole, 1x pin (E15).
6-wire connection cable ø 5.2 mm.
Cable with bending radius >= 52 mm (dynamic).
Order example:
K1658.010001
Note:
Works with magnetic strips K1663.
The reading distance between sensor and tape must be 0,1 to 2 mm.
The operating voltage supply and the current consumption of the sensor are provided by the downstream electronics.
The accuracy of the system, the repeatability and the travel speed also depend on the downstream electronics.
Plug connection to position indicators K1657.
Temperature range:
- Ambient temperature 0…60 °C
- Storage temperature -10…70 °C
Mounting:
Assembly must be carried out in accordance with the enclosed “User information”.
A) Sensor/tape reading distance ≤ 2 mm
B) Lateral deviation ± 2 mm
C) Misalignment ± 3°
D) Longitudinal inclination ± 1°
E) Lateral tilt ± 3°
Accessories:
Position indicators K1657.
Magnetic strips K1663.
Observe:
Relative humidity 100%. Condensation permitted (sensor head).
Technical data:
- Protection class IP 67; EN 60529 (sensor head)
- Shock resistance 2000 m/s², 11 ms; EN 60068-2-27
- Vibration resistance 200 m/s², 50 Hz…2 kHz; EN 60068-2-6
Drawing note:
1) Sine before cosine
2) Active measuring surface
3) Magnetic strip