Miniature indexing plunger with threaded flange TA.0, D=4, S=5, L4=8, A=25, Style C with latching groove without lock nut

Indexing plungers are used when it is necessary to prevent a change in the locking position due to transverse forces. It is only possible to move to another locking position after the pin has been disengaged manually.
If the disengagement has to take place over a longer period of time and the guided locking pin must be prevented from returning, form C should be used.

Mini indexing plungers can be used in many ways, especially in small installation spaces. They are an economical and space-saving alternative to the known standard designs.
The screw-on flange allows fixing to thin-walled components using countersunk head screws.
Material:
Zinc die-cast screw-on flange.
Guide pin for locking 1.4305.
Thermoplastic mushroom head.

Version:
Blue passivated screw-on flange.
Guide pin for locking with untreated surface.

Dark grey mushroom head RAL 7021 or traffic red RAL 3020.
Note:
In form C, the mushroom-head knob can be turned 30° to hold the locking pin in the retracted position.
Accessories:
Countersunk head screws K0708.