PAK1430.2300
Oil level indicator with electronic oil level monitoring, Normally closed contact M12 326, 6X30X30, SW=17
Estimated delivery: On request
Material:
Aluminium housing.
Polycarbonate tubes.
Caps in polyamide.
Rubber (NBR) O-ring and flat sealing ring.
PVC plastic reflector.
Plastic float.
Screws and hexagon nuts, steel.
Version:
Transparent sight window.
White reflector.
Red float with magnet.
Zinc-plated screws and hexagon nuts.
Order example:
K1430.1300
Note:
With the oil level indicator, the filling level can be viewed and detected by means of a reed switch. In addition to visual control, the oil level indicators can emit an electrical signal when the temperature of the liquid inside the container reaches the threshold of 70 °C.
As soon as the float reaches the defined minimum value, an electrical signal is emitted after the electrical circuit closes.
The sensor is positioned on the housing and its height can be adjusted according to the level control requirements. The minimum specification is approx. 35 mm from the centre of the lower fixing screw.
The reed switch is equipped with a normally open (NO) contact.
Temperature monitoring is carried out by means of a temperature switch (bimetallic). When the specified temperature is reached, the electrical circuit is closed (NO)
or opened (NC) by the sensor, depending on the model.
The maximum pressure corresponds to 1 bar. Tightening torque of the fixing screws 5 Nm.
The sight glass has good mechanical resistance and is compatible with mineral oil, petrol, lubricants, kerosene, solvents and most chemical agents. Avoid contact with alcoholic solutions and hot water.
Mounting:
The oil level indicator is fixed by two threaded holes M12 or, alternatively, by two holes of Ø 12,2 mm (± 0,2 mm) with flange nuts. Centre distance of the mounting holes = L1 ±0,5.
Functions:
The oil is measured by means of a magnetic float, which activates the electrical contact when it reaches the “REED” level switch. If the oil level drops below a certain level, an electrical pulse can be emitted.
Observe:
Strong magnetic fields affect operation.
Drawing note:
1) Viewing window
2) O-ring
3) Flange nut M12
4) End cap for the plastic end
5) Flat sealing ring
6) Hollow screw M12
7) Float with magnet
8) Reed switch
9) Temperature sensor
10) Aluminium housing
Aluminium housing.
Polycarbonate tubes.
Caps in polyamide.
Rubber (NBR) O-ring and flat sealing ring.
PVC plastic reflector.
Plastic float.
Screws and hexagon nuts, steel.
Version:
Transparent sight window.
White reflector.
Red float with magnet.
Zinc-plated screws and hexagon nuts.
Order example:
K1430.1300
Note:
With the oil level indicator, the filling level can be viewed and detected by means of a reed switch. In addition to visual control, the oil level indicators can emit an electrical signal when the temperature of the liquid inside the container reaches the threshold of 70 °C.
As soon as the float reaches the defined minimum value, an electrical signal is emitted after the electrical circuit closes.
The sensor is positioned on the housing and its height can be adjusted according to the level control requirements. The minimum specification is approx. 35 mm from the centre of the lower fixing screw.
The reed switch is equipped with a normally open (NO) contact.
Temperature monitoring is carried out by means of a temperature switch (bimetallic). When the specified temperature is reached, the electrical circuit is closed (NO)
or opened (NC) by the sensor, depending on the model.
The maximum pressure corresponds to 1 bar. Tightening torque of the fixing screws 5 Nm.
The sight glass has good mechanical resistance and is compatible with mineral oil, petrol, lubricants, kerosene, solvents and most chemical agents. Avoid contact with alcoholic solutions and hot water.
Mounting:
The oil level indicator is fixed by two threaded holes M12 or, alternatively, by two holes of Ø 12,2 mm (± 0,2 mm) with flange nuts. Centre distance of the mounting holes = L1 ±0,5.
Functions:
The oil is measured by means of a magnetic float, which activates the electrical contact when it reaches the “REED” level switch. If the oil level drops below a certain level, an electrical pulse can be emitted.
Observe:
Strong magnetic fields affect operation.
Drawing note:
1) Viewing window
2) O-ring
3) Flange nut M12
4) End cap for the plastic end
5) Flat sealing ring
6) Hollow screw M12
7) Float with magnet
8) Reed switch
9) Temperature sensor
10) Aluminium housing
| Material | Aluminum |
|---|---|
| Thread | M12 |
| Versão 2 | contacto normalmente fechado |
|---|---|
| Versão 1 | com monitorização eletrónica do nível de óleo e da temperatura |
| Material dos componentes | plástico |
| Denominação | Indicador do nível de óleo |
| H | 30 |
| H1 | 16,5 |
| L2 | 358,3 |
| B1 | 39 |
| D1 | M12 |
| Quantidade de parafusos de fixação | 2 |
| B | 30 |
| H2 | 80 |
| SW | 17 |
| L | 326,6 |
| L1 | 300 |
| Forma | longa |
Product Variations
| Model | Material | Thread | Versão 2 | Versão 1 | Material dos componentes | Denominação | H | H1 | L2 | B1 | D1 | Quantidade de parafusos de fixação | B | H2 | SW | L | L1 | Forma | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1430.1300 PAK1430.1300 | Aluminum | M12 | NO | com monitorização eletrónica do nível de óleo e da temperatura | plástico | Indicador do nível de óleo | 30 | 16,5 | 358,3 | 39 | M12 | 2 | 30 | 80 | 17 | 326,6 | 300 | longa | |||
| PAK1430.1400 PAK1430.1400 | Aluminum | M12 | NO | com monitorização eletrónica do nível de óleo e da temperatura | plástico | Indicador do nível de óleo | 30 | 16,5 | 458,3 | 39 | M12 | 2 | 30 | 80 | 17 | 426,6 | 400 | longa | |||
| PAK1430.1500 PAK1430.1500 | Aluminum | M12 | NO | com monitorização eletrónica do nível de óleo e da temperatura | plástico | Indicador do nível de óleo | 30 | 16,5 | 558,3 | 39 | M12 | 2 | 30 | 80 | 17 | 526,6 | 500 | longa | |||
| PAK1430.2300 PAK1430.2300 | Aluminum | M12 | contacto normalmente fechado | com monitorização eletrónica do nível de óleo e da temperatura | plástico | Indicador do nível de óleo | 30 | 16,5 | 358,3 | 39 | M12 | 2 | 30 | 80 | 17 | 326,6 | 300 | longa | |||
| PAK1430.2500 PAK1430.2500 | Aluminum | M12 | contacto normalmente fechado | com monitorização eletrónica do nível de óleo e da temperatura | plástico | Indicador do nível de óleo | 30 | 16,5 | 558,3 | 39 | M12 | 2 | 30 | 80 | 17 | 526,6 | 500 | longa | |||
PAK1430.1300
Oil level indicator with electronic oil level monitoring, Normally open contact M12 326, 6X30X30, SW=17
Material = Aluminum
Thread = M12
Versão 2 = NO
Versão 1 = com monitorização eletrónica do nível de óleo e da temperatura
Material dos componentes = plástico
Denominação = Indicador do nível de óleo
H = 30
H1 = 16,5
L2 = 358,3
B1 = 39
D1 = M12
Quantidade de parafusos de fixação = 2
B = 30
H2 = 80
SW = 17
L = 326,6
L1 = 300
Forma = longa
PAK1430.1400
Oil level indicator with electronic oil level monitoring, Normally open contact M12 426, 6X30X30, SW=17
Material = Aluminum
Thread = M12
Versão 2 = NO
Versão 1 = com monitorização eletrónica do nível de óleo e da temperatura
Material dos componentes = plástico
Denominação = Indicador do nível de óleo
H = 30
H1 = 16,5
L2 = 458,3
B1 = 39
D1 = M12
Quantidade de parafusos de fixação = 2
B = 30
H2 = 80
SW = 17
L = 426,6
L1 = 400
Forma = longa
PAK1430.1500
Oil level indicator with electronic oil level monitoring, Normally open contact M12 526, 6X30X30, SW=17
Material = Aluminum
Thread = M12
Versão 2 = NO
Versão 1 = com monitorização eletrónica do nível de óleo e da temperatura
Material dos componentes = plástico
Denominação = Indicador do nível de óleo
H = 30
H1 = 16,5
L2 = 558,3
B1 = 39
D1 = M12
Quantidade de parafusos de fixação = 2
B = 30
H2 = 80
SW = 17
L = 526,6
L1 = 500
Forma = longa
PAK1430.2300
Oil level indicator with electronic oil level monitoring, Normally closed contact M12 326, 6X30X30, SW=17
Material = Aluminum
Thread = M12
Versão 2 = contacto normalmente fechado
Versão 1 = com monitorização eletrónica do nível de óleo e da temperatura
Material dos componentes = plástico
Denominação = Indicador do nível de óleo
H = 30
H1 = 16,5
L2 = 358,3
B1 = 39
D1 = M12
Quantidade de parafusos de fixação = 2
B = 30
H2 = 80
SW = 17
L = 326,6
L1 = 300
Forma = longa
PAK1430.2500
Oil level indicator with electronic oil level monitoring, Normally closed contact M12 526, 6X30X30, SW=17
Material = Aluminum
Thread = M12
Versão 2 = contacto normalmente fechado
Versão 1 = com monitorização eletrónica do nível de óleo e da temperatura
Material dos componentes = plástico
Denominação = Indicador do nível de óleo
H = 30
H1 = 16,5
L2 = 558,3
B1 = 39
D1 = M12
Quantidade de parafusos de fixação = 2
B = 30
H2 = 80
SW = 17
L = 526,6
L1 = 500
Forma = longa