PAK1738.10141
Pneumatic positioning cylinder, Form B pneumatically clamped, D1=10 F=150 FH=300, Stainless steel, Components: Buna
Estimated delivery: On request
Form A is secured by means of a spring in the initial state. Release of the locating cylinder takes place by means of compressed air.
Form B is secured in the initial state. The locating cylinder is clamped by means of compressed air.
Material:
Main body in stainless steel.
NBR seal.
Version:
Stainless steel, untreated surface.
Order example:
K1738.10140
Ordering note:
Marking of form A by means of a characteristic line.
Note:
The clamping and holding forces specified refer to an operating pressure of 0,5 MPa.
When several locating units are used, the distance tolerance of ± 0.1 mm must not be exceeded.
The repeatability is ± 0,2 mm.
Mounting:
Mounting dimensions for plates 6 mm thick.
Accessories:
K1739 Locating bushes in stainless steel.
Drawing note:
1) Characteristic curve of form A
2) Pneumatic connection
3) Locating bush for locating cylinder
4) Locating cylinder form A
5) Locating cylinder form B
Form B is secured in the initial state. The locating cylinder is clamped by means of compressed air.
Material:
Main body in stainless steel.
NBR seal.
Version:
Stainless steel, untreated surface.
Order example:
K1738.10140
Ordering note:
Marking of form A by means of a characteristic line.
Note:
The clamping and holding forces specified refer to an operating pressure of 0,5 MPa.
When several locating units are used, the distance tolerance of ± 0.1 mm must not be exceeded.
The repeatability is ± 0,2 mm.
Mounting:
Mounting dimensions for plates 6 mm thick.
Accessories:
K1739 Locating bushes in stainless steel.
Drawing note:
1) Characteristic curve of form A
2) Pneumatic connection
3) Locating bush for locating cylinder
4) Locating cylinder form A
5) Locating cylinder form B
| Material | Stainless steel |
|---|
| H2 | 4,5 |
|---|---|
| SW | 19 |
| H3 | 26,5 |
| H | 5,5 |
| H1 | 21 |
| D | 19 |
| H4 | 10 |
| D3 | 23 |
| Força de retenção N | 300 |
| D2 | M14x1 |
| D4 | M5 |
| D1 | 10 |
| Forma | B |
| Versão 1 | pneumático |
| Material dos componentes | Buna N |
| Denominação | Cilindro posicionador |
| Pressão de funcionamento MPa | 0,3 - 0,7 |
| F | 150 |
| Tipo de forma | fixado pneumaticamente |
Product Variations
| Model | Material | H2 | SW | H3 | H | H1 | D | H4 | D3 | Força de retenção N | D2 | D4 | D1 | Forma | Versão 1 | Material dos componentes | Denominação | Pressão de funcionamento MPa | F | Tipo de forma | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1738.10140 PAK1738.10140 | Stainless steel | 4,5 | 19 | 26,5 | 5,5 | 21 | 19 | 10 | 23 | 150 | M14x1 | M5 | 10 | A | pneumático | Buna N | Cilindro posicionador | 0,3 - 0,7 | 50 | fixado por mola | |||
| PAK1738.10141 PAK1738.10141 | Stainless steel | 4,5 | 19 | 26,5 | 5,5 | 21 | 19 | 10 | 23 | 300 | M14x1 | M5 | 10 | B | pneumático | Buna N | Cilindro posicionador | 0,3 - 0,7 | 150 | fixado pneumaticamente | |||
PAK1738.10140
Pneumatic positioning cylinder, Form A spring-clamped, D1=10 F=50 FH=150, Stainless steel, Components: Buna N
Material = Stainless steel
H2 = 4,5
SW = 19
H3 = 26,5
H = 5,5
H1 = 21
D = 19
H4 = 10
D3 = 23
Força de retenção N = 150
D2 = M14x1
D4 = M5
D1 = 10
Forma = A
Versão 1 = pneumático
Material dos componentes = Buna N
Denominação = Cilindro posicionador
Pressão de funcionamento MPa = 0,3 - 0,7
F = 50
Tipo de forma = fixado por mola
PAK1738.10141
Pneumatic positioning cylinder, Form B pneumatically clamped, D1=10 F=150 FH=300, Stainless steel, Components: Buna
Material = Stainless steel
H2 = 4,5
SW = 19
H3 = 26,5
H = 5,5
H1 = 21
D = 19
H4 = 10
D3 = 23
Força de retenção N = 300
D2 = M14x1
D4 = M5
D1 = 10
Forma = B
Versão 1 = pneumático
Material dos componentes = Buna N
Denominação = Cilindro posicionador
Pressão de funcionamento MPa = 0,3 - 0,7
F = 150
Tipo de forma = fixado pneumaticamente