PAK1740.0618
Pneumatic positioning device, Round, D=6, M18X1 F=30 FH=75, Stainless steel, Components: Buna N
Estimated delivery: On request
Clamping is carried out by means of compressed air.
Release takes place by means of the integrated spring.
Material:
Main body in stainless steel.
NBR seal.
Version:
Stainless steel, untreated surface.
Order example:
K1740.0618
Note:
Mounting dimensions for plates 6 mm thick.
The clamping and holding forces specified refer to an operating pressure of 0,5 MPa.
When several locating units are used, the distance tolerance of ±0.1 mm must not be exceeded.
The repeatability is ± 0,2 mm.
Accessories:
Guide pin K1564.
Drawing note:
1) Air valve (single-sided)
2) "Clamping" connection
3) Guide pin
4) Positioning fixture
Release takes place by means of the integrated spring.
Material:
Main body in stainless steel.
NBR seal.
Version:
Stainless steel, untreated surface.
Order example:
K1740.0618
Note:
Mounting dimensions for plates 6 mm thick.
The clamping and holding forces specified refer to an operating pressure of 0,5 MPa.
When several locating units are used, the distance tolerance of ±0.1 mm must not be exceeded.
The repeatability is ± 0,2 mm.
Accessories:
Guide pin K1564.
Drawing note:
1) Air valve (single-sided)
2) "Clamping" connection
3) Guide pin
4) Positioning fixture
| Material | Stainless steel |
|---|
| H2 | 15 |
|---|---|
| SW | 19 |
| H3 | 26,7 |
| H | 5,5 |
| H1 | 4 |
| D | 6 |
| D3 | M5 |
| Força de retenção N | 75 |
| D2 | 21 |
| D1 | M18x1 |
| Versão 2 | redondo |
| Versão 1 | pneumático |
| Material dos componentes | Buna N |
| Denominação | Dispositivo de posicionamento |
| Pressão de funcionamento MPa | 0,3 - 0,7 |
| F | 30 |
Product Variations
| Model | Material | H2 | SW | H3 | H | H1 | D | D3 | Força de retenção N | D2 | D1 | Versão 2 | Versão 1 | Material dos componentes | Denominação | Pressão de funcionamento MPa | F | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1740.0618 PAK1740.0618 | Stainless steel | 15 | 19 | 26,7 | 5,5 | 4 | 6 | M5 | 75 | 21 | M18x1 | redondo | pneumático | Buna N | Dispositivo de posicionamento | 0,3 - 0,7 | 30 | |||
PAK1740.0618
Pneumatic positioning device, Round, D=6, M18X1 F=30 FH=75, Stainless steel, Components: Buna N
Material = Stainless steel
H2 = 15
SW = 19
H3 = 26,7
H = 5,5
H1 = 4
D = 6
D3 = M5
Força de retenção N = 75
D2 = 21
D1 = M18x1
Versão 2 = redondo
Versão 1 = pneumático
Material dos componentes = Buna N
Denominação = Dispositivo de posicionamento
Pressão de funcionamento MPa = 0,3 - 0,7
F = 30