PAK1741.0618
Pneumatic positioning device, With flange, D=6, M04 F=40 F1=6 FH=100, Stainless steel, Components: Buna N
Estimated delivery: On request
Clamping is carried out by means of compressed air. In the event of a pressure drop, clamping can be maintained by means of the spring.
To release/loosen the fixtures by means of compressed air, the spring force of 6 N must be exceeded.
Material:
Main body in stainless steel.
NBR seal.
Version:
Stainless steel, untreated surface.
Order example:
K1741.0618
Ordering note:
The cheese-head screws M3 x 28 for fastening from below are included in the scope of delivery.
The cheese-head screws M4 for fastening from above are not included in the scope of delivery.
Note:
Mounting dimensions for plates 6 mm thick.
The clamping and holding forces specified refer to an operating pressure of 0,5 MPa.
When several locating units are used, the distance tolerance of ±0.1 mm must not be exceeded.
The repeatability is ± 0,2 mm.
Accessories:
Guide pin K1564.
Drawing note:
1) "Clamping" connection
2) "Loosening" connection
3) Cheese head screw M3
4) Cheese head screw M4
5) Guide pins
6) Positioning fixture
To release/loosen the fixtures by means of compressed air, the spring force of 6 N must be exceeded.
Material:
Main body in stainless steel.
NBR seal.
Version:
Stainless steel, untreated surface.
Order example:
K1741.0618
Ordering note:
The cheese-head screws M3 x 28 for fastening from below are included in the scope of delivery.
The cheese-head screws M4 for fastening from above are not included in the scope of delivery.
Note:
Mounting dimensions for plates 6 mm thick.
The clamping and holding forces specified refer to an operating pressure of 0,5 MPa.
When several locating units are used, the distance tolerance of ±0.1 mm must not be exceeded.
The repeatability is ± 0,2 mm.
Accessories:
Guide pin K1564.
Drawing note:
1) "Clamping" connection
2) "Loosening" connection
3) Cheese head screw M3
4) Cheese head screw M4
5) Guide pins
6) Positioning fixture
| Material | Stainless steel |
|---|
| H2 | 26,5 |
|---|---|
| B2 | 4 |
| H3 | 8 |
| L | 27,5 |
| H | 5,5 |
| H1 | 23 |
| L2 | 12 |
| B1 | 17 |
| D | 6 |
| H4 | 11 |
| D3 | M3 |
| Força de retenção N | 100 |
| D2 | 18 |
| H5 | 8 |
| L1 | 16 |
| D5 | 3,3 |
| D4 | M3 |
| B3 | 4 |
| D1 | M4 |
| B | 23 |
| B4 | 6 |
| L3 | 7 |
| Versão 2 | com flange |
| Versão 1 | pneumático |
| Material dos componentes | Buna N |
| Denominação | Dispositivo de posicionamento |
| Pressão de funcionamento MPa | 0,3 - 0,7 |
| F | 40 |
| F1 | 6 |
Product Variations
| Model | Material | H2 | B2 | H3 | L | H | H1 | L2 | B1 | D | H4 | D3 | Força de retenção N | D2 | H5 | L1 | D5 | D4 | B3 | D1 | B | B4 | L3 | Versão 2 | Versão 1 | Material dos componentes | Denominação | Pressão de funcionamento MPa | F | F1 | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1741.0618 PAK1741.0618 | Stainless steel | 26,5 | 4 | 8 | 27,5 | 5,5 | 23 | 12 | 17 | 6 | 11 | M3 | 100 | 18 | 8 | 16 | 3,3 | M3 | 4 | M4 | 23 | 6 | 7 | com flange | pneumático | Buna N | Dispositivo de posicionamento | 0,3 - 0,7 | 40 | 6 | |||
PAK1741.0618
Pneumatic positioning device, With flange, D=6, M04 F=40 F1=6 FH=100, Stainless steel, Components: Buna N
Material = Stainless steel
H2 = 26,5
B2 = 4
H3 = 8
L = 27,5
H = 5,5
H1 = 23
L2 = 12
B1 = 17
D = 6
H4 = 11
D3 = M3
Força de retenção N = 100
D2 = 18
H5 = 8
L1 = 16
D5 = 3,3
D4 = M3
B3 = 4
D1 = M4
B = 23
B4 = 6
L3 = 7
Versão 2 = com flange
Versão 1 = pneumático
Material dos componentes = Buna N
Denominação = Dispositivo de posicionamento
Pressão de funcionamento MPa = 0,3 - 0,7
F = 40
F1 = 6