PAK1390.40075
Pneumatic pull clamp D=75 case-hardened steel, Burnished, Case-hardened
Estimated delivery: On request
Material:
Hardened steel.
Version:
Hardened, burnished and ground clamping element.
Order example:
K1390.40075
Note:
Pneumatic pull clamps are used for clamping workpieces and fixtures.
The guide pins are screwed into the workpiece or the fixture.
Clamping process:
The clamping element is opened by applying compressed air to the “open” connection point.
The clamping element closes (clamping process) by applying compressed air at the “close” connection.
The third connection (D5) is used for the blow-off and cleaning processes of the support surface. In addition, it is possible to detect whether the workpiece remains on the support surface. It can also be removed more easily from the clamping element after opening.
The system can also be used as a “zero-point clamping system”.
The tensile force refers to 0,5 MPa.
Permissible counterforce = 2x of the clamping force of the module.
Accessories:
K1391 Fixing screws for pneumatic pull clamps.
Hardened steel.
Version:
Hardened, burnished and ground clamping element.
Order example:
K1390.40075
Note:
Pneumatic pull clamps are used for clamping workpieces and fixtures.
The guide pins are screwed into the workpiece or the fixture.
Clamping process:
The clamping element is opened by applying compressed air to the “open” connection point.
The clamping element closes (clamping process) by applying compressed air at the “close” connection.
The third connection (D5) is used for the blow-off and cleaning processes of the support surface. In addition, it is possible to detect whether the workpiece remains on the support surface. It can also be removed more easily from the clamping element after opening.
The system can also be used as a “zero-point clamping system”.
The tensile force refers to 0,5 MPa.
Permissible counterforce = 2x of the clamping force of the module.
Accessories:
K1391 Fixing screws for pneumatic pull clamps.
| Material | Case-hardened steel |
|---|---|
| Color | Burnished |
| D4 | 63 |
|---|---|
| D5 | M5 |
| Cor dos componentes | cementado |
| Versão 1 | pneumático |
| Denominação | Grampo de tração |
| H | 40 |
| H1 | 38 |
| Pressão de funcionamento MPa | 0,3 - 1,0 |
| H6 | 1,9 |
| D1 | 50 |
| D2 | 40 |
| D3 | 8 |
| H2 | 30 |
| H3 | 26 |
| D | 75 |
| Força de aperto kN | 1 |
| H4 | 15 |
| H5 | 6 |
| Força de tensão (fixação por força da mola) N | 160 |
Product Variations
| Model | Material | Color | D4 | D5 | Cor dos componentes | Versão 1 | Denominação | H | H1 | Pressão de funcionamento MPa | H6 | D1 | D2 | D3 | H2 | H3 | D | Força de aperto kN | H4 | H5 | Força de tensão (fixação por força da mola) N | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1390.40075 PAK1390.40075 | Case-hardened steel | Burnished | 63 | M5 | cementado | pneumático | Grampo de tração | 40 | 38 | 0,3 - 1,0 | 1,9 | 50 | 40 | 8 | 30 | 26 | 75 | 1 | 15 | 6 | 160 | |||
| PAK1390.50105 PAK1390.50105 | Case-hardened steel | Burnished | 88 | G 1/8 | cementado | pneumático | Grampo de tração | 50 | 47 | 0,3 - 1,0 | 1,9 | 75 | 63 | 12 | 35 | 31 | 105 | 2,5 | 19 | 10 | 500 | |||
PAK1390.40075
Pneumatic pull clamp D=75 case-hardened steel, Burnished, Case-hardened
Material = Case-hardened steel
Color = Burnished
D4 = 63
D5 = M5
Cor dos componentes = cementado
Versão 1 = pneumático
Denominação = Grampo de tração
H = 40
H1 = 38
Pressão de funcionamento MPa = 0,3 - 1,0
H6 = 1,9
D1 = 50
D2 = 40
D3 = 8
H2 = 30
H3 = 26
D = 75
Força de aperto kN = 1
H4 = 15
H5 = 6
Força de tensão (fixação por força da mola) N = 160
PAK1390.50105
Pneumatic pull clamp D=105 case-hardened steel, Burnished, Case-hardened
Material = Case-hardened steel
Color = Burnished
D4 = 88
D5 = G 1/8
Cor dos componentes = cementado
Versão 1 = pneumático
Denominação = Grampo de tração
H = 50
H1 = 47
Pressão de funcionamento MPa = 0,3 - 1,0
H6 = 1,9
D1 = 75
D2 = 63
D3 = 12
H2 = 35
H3 = 31
D = 105
Força de aperto kN = 2,5
H4 = 19
H5 = 10
Força de tensão (fixação por força da mola) N = 500