PAK1664.1121301
Power clamps with 3 steps, Long version, Form A with clamping arm, M12, L=130, B=68, H=101, Hardened steel
Estimated delivery: On request
Material:
Hardened steel.
Version:
forged, black zinc-plated.
Application:
By actuating the adjusting screw, the height of the clamping arm is adjusted continuously, thus clamping the workpiece.
Mounting:
1. Position the support element on the workbench and fasten it with the specified tightening torque.
2. Place the clamping arm in the desired position.
3. When the adjusting screw is tightened, the workpiece is clamped.
Advantages:
- Very high clamping forces (22-49 kN).
- Easy mounting of the elements.
- Extremely quick and uncomplicated clamping.
- Adjustable in height and length, without stepping.
- Applicable in T-slots of 14-28 mm, as well as in modular clamping systems M12, M16, M20.
- Tip in smooth and knurled variants.
Scope of delivery:
- Clamping unit
- Support element with 3 adjustment steps
- Clamping kit
Accessories:
Extension element K1206
Spring plungers K1215
Hardened steel.
Version:
forged, black zinc-plated.
Application:
By actuating the adjusting screw, the height of the clamping arm is adjusted continuously, thus clamping the workpiece.
Mounting:
1. Position the support element on the workbench and fasten it with the specified tightening torque.
2. Place the clamping arm in the desired position.
3. When the adjusting screw is tightened, the workpiece is clamped.
Advantages:
- Very high clamping forces (22-49 kN).
- Easy mounting of the elements.
- Extremely quick and uncomplicated clamping.
- Adjustable in height and length, without stepping.
- Applicable in T-slots of 14-28 mm, as well as in modular clamping systems M12, M16, M20.
- Tip in smooth and knurled variants.
Scope of delivery:
- Clamping unit
- Support element with 3 adjustment steps
- Clamping kit
Accessories:
Extension element K1206
Spring plungers K1215
| Material | Hardened steel |
|---|---|
| Color | Black |
| Finishing | Zinc-plated |
| Thread | M12 |
| H2 | 146 |
|---|---|
| SW | 8 |
| H3 | 34 |
| A mín. | 37 |
| A máx. | 106 |
| L | 130 |
| H | 101 |
| H1 | 13-129 |
| B1 | 18 |
| D | M12 |
| Força de aperto kN | 30 |
| H4 | 27 |
| Largura de ranhura | 14 |
| H5 | 27 |
| L1 | 22,5 |
| D1 | M16 |
| B | 68 |
| Forma | A |
| Versão 2 | de 3 degraus |
| Versão 1 | versão longa |
| Denominação | Grampo de força |
| Binário de aperto M1 Nm | 100 |
| Binário de aperto M2 Nm | 70 |
| Tipo de forma | com braço de aperto |
Product Variations
| Model | Material | Color | Finishing | Thread | H2 | SW | H3 | A mín. | A máx. | L | H | H1 | B1 | D | Força de aperto kN | H4 | Largura de ranhura | H5 | L1 | D1 | B | Forma | Versão 2 | Versão 1 | Denominação | Binário de aperto M1 Nm | Binário de aperto M2 Nm | Tipo de forma | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1664.1121301 PAK1664.1121301 | Hardened steel | Black | Zinc-plated | M12 | 146 | 8 | 34 | 37 | 106 | 130 | 101 | 13-129 | 18 | M12 | 30 | 27 | 14 | 27 | 22,5 | M16 | 68 | A | de 3 degraus | versão longa | Grampo de força | 100 | 70 | com braço de aperto | |||
| PAK1664.1161501 PAK1664.1161501 | Hardened steel | Black | Zinc-plated | M16 | 175 | 10 | 43 | 48 | 144 | 150 | 116 | 16-147 | 20 | M16 | 43 | 29 | 18 | 29 | 25 | M20 | 75 | A | de 3 degraus | versão longa | Grampo de força | 200 | 150 | com braço de aperto | |||
| PAK1664.1201701 PAK1664.1201701 | Hardened steel | Black | Zinc-plated | M20 | 207 | 12 | 52 | 68 | 172 | 170 | 140 | 16-169 | 25 | M20 | 49 | 34 | 22 | 34 | 29 | M24 | 85 | A | de 3 degraus | versão longa | Grampo de força | 220 | 200 | com braço de aperto | |||
| PAK1664.2120651 PAK1664.2120651 | Hardened steel | Black | Zinc-plated | M12 | 98 | 6 | 25 | 30 | 58 | 65 | 67 | 9-74 | 13 | M12 | 22 | 16 | 14 | 16 | 14,5 | M12 | 52 | A | de 3 degraus | versão curta | Grampo de força | 55 | 40 | com braço de aperto | |||
PAK1664.1121301
Power clamps with 3 steps, Long version, Form A with clamping arm, M12, L=130, B=68, H=101, Hardened steel
Material = Hardened steel
Color = Black
Finishing = Zinc-plated
Thread = M12
H2 = 146
SW = 8
H3 = 34
A mín. = 37
A máx. = 106
L = 130
H = 101
H1 = 13-129
B1 = 18
D = M12
Força de aperto kN = 30
H4 = 27
Largura de ranhura = 14
H5 = 27
L1 = 22,5
D1 = M16
B = 68
Forma = A
Versão 2 = de 3 degraus
Versão 1 = versão longa
Denominação = Grampo de força
Binário de aperto M1 Nm = 100
Binário de aperto M2 Nm = 70
Tipo de forma = com braço de aperto
PAK1664.1161501
Power clamps with 3 steps, Long version, Form A with clamping arm, M16, L=150, B=75, H=116, Hardened steel
Material = Hardened steel
Color = Black
Finishing = Zinc-plated
Thread = M16
H2 = 175
SW = 10
H3 = 43
A mín. = 48
A máx. = 144
L = 150
H = 116
H1 = 16-147
B1 = 20
D = M16
Força de aperto kN = 43
H4 = 29
Largura de ranhura = 18
H5 = 29
L1 = 25
D1 = M20
B = 75
Forma = A
Versão 2 = de 3 degraus
Versão 1 = versão longa
Denominação = Grampo de força
Binário de aperto M1 Nm = 200
Binário de aperto M2 Nm = 150
Tipo de forma = com braço de aperto
PAK1664.1201701
Power clamps with 3 steps, Long version, Form A with clamping arm, M20, L=170, B=85, H=140, Hardened steel
Material = Hardened steel
Color = Black
Finishing = Zinc-plated
Thread = M20
H2 = 207
SW = 12
H3 = 52
A mín. = 68
A máx. = 172
L = 170
H = 140
H1 = 16-169
B1 = 25
D = M20
Força de aperto kN = 49
H4 = 34
Largura de ranhura = 22
H5 = 34
L1 = 29
D1 = M24
B = 85
Forma = A
Versão 2 = de 3 degraus
Versão 1 = versão longa
Denominação = Grampo de força
Binário de aperto M1 Nm = 220
Binário de aperto M2 Nm = 200
Tipo de forma = com braço de aperto
PAK1664.2120651
Power clamps with 3 steps, Short version, Form A with clamping arm, M12, L=65, B=52, H=67, Hardened steel
Material = Hardened steel
Color = Black
Finishing = Zinc-plated
Thread = M12
H2 = 98
SW = 6
H3 = 25
A mín. = 30
A máx. = 58
L = 65
H = 67
H1 = 9-74
B1 = 13
D = M12
Força de aperto kN = 22
H4 = 16
Largura de ranhura = 14
H5 = 16
L1 = 14,5
D1 = M12
B = 52
Forma = A
Versão 2 = de 3 degraus
Versão 1 = versão curta
Denominação = Grampo de força
Binário de aperto M1 Nm = 55
Binário de aperto M2 Nm = 40
Tipo de forma = com braço de aperto