Press-fit guide bush for condition sensor, D=6, M12X1, 5, Form C with thread and lead-in cone, Steel part

Locating bushes form an engagement point for operating and plug-in devices, in which they engage securely and precisely.

In locating bushes for condition sensor, a clamping nut for fixing a Ø3 sensor in the bush is provided. The sensor makes it possible to electronically query whether a pin is present in the locating bush.
When several bushes are used, it is possible to identify in which of them the operating or plug-in element is located.
Material:
Steel or stainless steel locating bush 1.4034.
Brass clamping nut.

Version:
Locating bush:
Hardened and burnished steel.
Hardened stainless steel with untreated surface.

Nickel-plated clamping nut.
Note:
Adapted to retaining parts for mounting bracket K0638.
The clamping nut is supplied unassembled.
Maximum tightening torque of the clamping nut: 1,2 Nm.
Application:
Locating bushes with status sensor enable operation-dependent process control. In addition, it is possible to ensure that the operating and plug-in device is in the desired location.
For example, for format adjustment on packaging machines.
Mounting:
The sensor is fixed in the bush by means of the clamping nut and set axially. When the clamping nut is tightened, the sensor is finally secured.

The detailed procedure is described in the assembly instructions.