PAK1406.1007
Raw magnet, block magnet 10 ±0, 1X7, 5 ±0, 1X2 ±0, 1, NdFeB, Nickel-plated
Estimated delivery: On request
Material:
NdFeB N35 (neodymium).
Version:
nickel-plated.
Order example:
K1406.0704
Note:
Raw NdFeB magnets are an unshielded magnetic system.
Neodymium-iron-boron magnets have an extremely high magnetic force. Handle these raw magnets with particular care.
• High risk of crushing: larger magnets in particular can cause considerable crushing injuries to fingers or hands when pulled together.
• Brittle material: neodymium-iron-boron is a very hard but brittle material. Magnets can break or shatter easily in the event of impact, falling or uncontrolled collision.
• Fragments with sharp edges: fragments with sharp edges and partially shattered pieces are frequently produced when breaking. It is therefore recommended to wear safety goggles during handling.
• Danger due to collision: if two magnets collide unchecked, the brittle material can cause explosive splintering.
Temperature range:
max. 80 °C.
Mounting:
The magnets can be fitted by pressing or bonding.
Drawing note:
1) Adhesion surface
NdFeB N35 (neodymium).
Version:
nickel-plated.
Order example:
K1406.0704
Note:
Raw NdFeB magnets are an unshielded magnetic system.
Neodymium-iron-boron magnets have an extremely high magnetic force. Handle these raw magnets with particular care.
• High risk of crushing: larger magnets in particular can cause considerable crushing injuries to fingers or hands when pulled together.
• Brittle material: neodymium-iron-boron is a very hard but brittle material. Magnets can break or shatter easily in the event of impact, falling or uncontrolled collision.
• Fragments with sharp edges: fragments with sharp edges and partially shattered pieces are frequently produced when breaking. It is therefore recommended to wear safety goggles during handling.
• Danger due to collision: if two magnets collide unchecked, the brittle material can cause explosive splintering.
Temperature range:
max. 80 °C.
Mounting:
The magnets can be fitted by pressing or bonding.
Drawing note:
1) Adhesion surface
| Material | Neodímio ( NdFeB ) |
|---|---|
| Finishing | Nickel plated |
| Versão 1 | Íman em bloco |
|---|---|
| Denominação | Íman em bruto |
| H | 2 ±0,1 |
| B | 7,5 ±0,1 |
| Força de aderência N | 11 |
| L | 10 ±0,1 |
| Temperatura* máx. °C | 80 |
| N° de UN | 2807 |
| Classe de mercadorias perigosas | classe de mercadorias perigosas 9 |
