PAK1405.56
Raw magnet, ring magnet, Style B, Nickel-plated NdFeB, D1=15 ±0, 1, D=56 ±0, 2
Estimated delivery: On request
Material:
NdFeB (neodymium).
Version:
zinc-plated part.
Note:
Raw NdFeB magnets are an unshielded magnetic system.
Neodymium-iron-boron magnets have an extremely high magnetic force. Handle these raw magnets with particular care.
• High risk of crushing: larger magnets in particular can cause considerable crushing injuries to fingers or hands when pulled together.
• Brittle material: neodymium-iron-boron is a very hard but brittle material. Magnets can break or shatter easily in the event of impact, falling or uncontrolled collision.
• Fragments with sharp edges: fragments with sharp edges and partially shattered pieces are frequently produced when breaking. It is therefore recommended to wear safety goggles during handling.
• Danger due to collision: if two magnets collide unchecked, the brittle material can cause explosive splintering.
Temperature range:
max. 80 °C.
Mounting:
The magnets can be fitted by pressing, screwing or bonding.
Drawing note:
1) Adhesion surface
NdFeB (neodymium).
Version:
zinc-plated part.
Note:
Raw NdFeB magnets are an unshielded magnetic system.
Neodymium-iron-boron magnets have an extremely high magnetic force. Handle these raw magnets with particular care.
• High risk of crushing: larger magnets in particular can cause considerable crushing injuries to fingers or hands when pulled together.
• Brittle material: neodymium-iron-boron is a very hard but brittle material. Magnets can break or shatter easily in the event of impact, falling or uncontrolled collision.
• Fragments with sharp edges: fragments with sharp edges and partially shattered pieces are frequently produced when breaking. It is therefore recommended to wear safety goggles during handling.
• Danger due to collision: if two magnets collide unchecked, the brittle material can cause explosive splintering.
Temperature range:
max. 80 °C.
Mounting:
The magnets can be fitted by pressing, screwing or bonding.
Drawing note:
1) Adhesion surface
| Material | Neodímio ( NdFeB ) |
|---|---|
| Finishing | Nickel plated |
| Versão 1 | íman em anel |
|---|---|
| Denominação | Íman em bruto |
| H | 6 ±0,1 |
| D1 | 15 ±0,1 |
| D | 56 ±0,2 |
| Força de aderência N | 230 |
| Forma | B |
| Temperatura* máx. °C | 80 |
| N° de UN | 2807 |
| Classe de mercadorias perigosas | classe de mercadorias perigosas 9 |
