Receptacle bush with condition sensor, M16X1, 5, D=6, 2, Form B with thread and collar for pin, Stainless steel

Receiving bushes form an engagement point for rotary-actuated ball lock pins, in which they engage securely and precisely.

In receiving bushes with condition sensor, a variable adjustable sensor is located in the bush. It enables electronic checking of whether the rotary-actuated ball lock pin is locked.
When several bushes are used, it is possible to identify in which of them the ball lock pin is located.
Material:
Steel or stainless steel receiving bush 1.4305.
Stainless steel sensor.
Brass clamping nut.

Version:
Receiving bush and sensor, untreated surface.
Nickel-plated clamping nut.
Order example:
K1843.12102011
Note:
The condition sensor and clamping nut are supplied disassembled.
Maximum tightening torque of the clamping nut: 1,2 Nm.
Application:
Receiving bushes with status sensor enable operation-dependent process control. In addition, it is possible to ensure that the ball lock pin or the quick-release pin is in the desired location.
Mounting:
The sensor is fixed in the bush by means of the clamping nut and set axially. When the clamping nut is tightened, the sensor is finally secured.

The detailed procedure is described in the assembly instructions.
Accessories:
Ball lock pin with rotary actuation K1064.
Technical data:
Inductive sensor:
Output circuit: PNP normally open contact (NO)
Operating voltage: 10 - 30 V DC
Operating current: <100 mA
Operating distance: 1 mm
Switching frequency: <3500 Hz
Short-circuit protection: yes
Reverse polarity protection: yes
Protection class: IP 67
Connection type: PVC cable, 2 m, PUR, with plug connector
Temperature range: -25° C - +70°C
Approval: CE, c-UL-us, EAC
Safety:
Receiving bushes with condition sensor are not suitable for the protection of persons.
Drawing note:
1) LED

BN = brown
BK = black
BU = blue