PAK1561.14
Rotary clamping latch, D1=14, Untreated stainless steel, Components: black polyamide
Estimated delivery: On request
Rotary clamping latches are used for quick and easy replacement and closing of devices or covers.
Tool-free clamping reduces set-up time.
Material:
Stainless steel housing.
PA (polyamide) thermoplastic rotating head
Version:
Housing, untreated surface.
Glass-fibre-reinforced PA rotating head, black.
Note:
The M2 or M3 stainless steel fastening screws are included in the scope of delivery.
Mounting option 1 for plate thickness of 6 mm.
Mounting option 2 for plate thickness > 6 mm to 14 mm.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Make sure that the rotary knob is in the "OFF" position.
Install the latch over the guide pin and turn the knob to the "ON" position.
When the locking point is reached, the device emits an audible click.
Accessories:
Guide pin K1564.
Drawing note:
1) Plate
Tool-free clamping reduces set-up time.
Material:
Stainless steel housing.
PA (polyamide) thermoplastic rotating head
Version:
Housing, untreated surface.
Glass-fibre-reinforced PA rotating head, black.
Note:
The M2 or M3 stainless steel fastening screws are included in the scope of delivery.
Mounting option 1 for plate thickness of 6 mm.
Mounting option 2 for plate thickness > 6 mm to 14 mm.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Make sure that the rotary knob is in the "OFF" position.
Install the latch over the guide pin and turn the knob to the "ON" position.
When the locking point is reached, the device emits an audible click.
Accessories:
Guide pin K1564.
Drawing note:
1) Plate
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| H2 | 5,5 |
|---|---|
| T | 6 |
| H | 23 |
| H1 | 6,5 |
| D | 6 |
| D3 | 25 |
| Força de aperto N | 7 |
| Constância térmica | ≤130 °C |
| D2 | 25 |
| D5 | 14 |
| D4 | 21 |
| D8 | 2,4 |
| D7 | 4,4 |
| D6 | 26 |
| T2 | 2,5 |
| T1 | 6-10 |
| D1 | 14 |
| M | M2x3 |
| Cor dos componentes | preto |
| Material dos componentes | poliamida |
| Denominação | Fecho rotativo de aperto |
| Força de extração F kN | 0,25 |
| Cisalhamento kN | 1,1 |
| Força de retenção N | 110 |
Product Variations
| Model | Material | Finishing | H2 | T | H | H1 | D | D3 | Força de aperto N | Constância térmica | D2 | D5 | D4 | D8 | D7 | D6 | T2 | T1 | D1 | M | Cor dos componentes | Material dos componentes | Denominação | Força de extração F kN | Cisalhamento kN | Força de retenção N | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1561.14 PAK1561.14 | Stainless steel | Natural | 5,5 | 6 | 23 | 6,5 | 6 | 25 | 7 | ≤130 °C | 25 | 14 | 21 | 2,4 | 4,4 | 26 | 2,5 | 6-10 | 14 | M2x3 | preto | poliamida | Fecho rotativo de aperto | 0,25 | 1,1 | 110 | |||
| PAK1561.18 PAK1561.18 | Stainless steel | Natural | 5,5 | 6 | 28 | 10 | 8 | 34 | 9 | ≤130 °C | 34 | 18 | 28 | 3,4 | 6,5 | 35 | 2,5 | 6-14 | 18 | M3x4 | preto | poliamida | Fecho rotativo de aperto | 0,4 | 1,8 | 150 | |||
PAK1561.14
Rotary clamping latch, D1=14, Untreated stainless steel, Components: black polyamide
Material = Stainless steel
Finishing = Natural
H2 = 5,5
T = 6
H = 23
H1 = 6,5
D = 6
D3 = 25
Força de aperto N = 7
Constância térmica = ≤130 °C
D2 = 25
D5 = 14
D4 = 21
D8 = 2,4
D7 = 4,4
D6 = 26
T2 = 2,5
T1 = 6-10
D1 = 14
M = M2x3
Cor dos componentes = preto
Material dos componentes = poliamida
Denominação = Fecho rotativo de aperto
Força de extração F kN = 0,25
Cisalhamento kN = 1,1
Força de retenção N = 110
PAK1561.18
Rotary clamping latch, D1=18, Untreated stainless steel, Components: black polyamide
Material = Stainless steel
Finishing = Natural
H2 = 5,5
T = 6
H = 28
H1 = 10
D = 8
D3 = 34
Força de aperto N = 9
Constância térmica = ≤130 °C
D2 = 34
D5 = 18
D4 = 28
D8 = 3,4
D7 = 6,5
D6 = 35
T2 = 2,5
T1 = 6-14
D1 = 18
M = M3x4
Cor dos componentes = preto
Material dos componentes = poliamida
Denominação = Fecho rotativo de aperto
Força de extração F kN = 0,4
Cisalhamento kN = 1,8
Força de retenção N = 150