PAK1561.118
Rotary clamping latch, D1=18, Untreated stainless steel, Components: untreated stainless steel
Estimated delivery: On request
Rotary clamping latches are used for quick and easy replacement and closing of devices or covers.
Tool-free clamping reduces set-up time.
Material:
Stainless steel housing.
Stainless steel rotating head.
Version:
Housing, untreated surface.
Stainless steel rotating head, untreated surface.
Note:
The M2 or M3 stainless steel fastening screws are included in the scope of delivery.
Mounting option 1 for plate thickness of 6 mm.
Mounting option 2 for plate thickness > 6 mm to 14 mm.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Make sure that the rotary knob is in the "OFF" position.
Install the latch over the guide pin and turn the knob to the "ON" position.
When the locking point is reached, the device emits an audible click.
Accessories:
Guide pin K1564.
Drawing note:
1) Plate
Tool-free clamping reduces set-up time.
Material:
Stainless steel housing.
Stainless steel rotating head.
Version:
Housing, untreated surface.
Stainless steel rotating head, untreated surface.
Note:
The M2 or M3 stainless steel fastening screws are included in the scope of delivery.
Mounting option 1 for plate thickness of 6 mm.
Mounting option 2 for plate thickness > 6 mm to 14 mm.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Make sure that the rotary knob is in the "OFF" position.
Install the latch over the guide pin and turn the knob to the "ON" position.
When the locking point is reached, the device emits an audible click.
Accessories:
Guide pin K1564.
Drawing note:
1) Plate
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| H2 | 5,5 |
|---|---|
| T | 6 |
| H | 28 |
| H1 | 10 |
| D | 8 |
| D3 | 34 |
| Força de aperto N | 9 |
| Constância térmica | ≤200 °C |
| D2 | 34 |
| D5 | 18 |
| D4 | 28 |
| D8 | 3,4 |
| D7 | 6,5 |
| D6 | 35 |
| T2 | 2,5 |
| T1 | 6-14 |
| D1 | 18 |
| M | M3x4 |
| Material dos componentes | aço inoxidável |
| Denominação | Fecho rotativo de aperto |
| Força de extração F kN | 0,4 |
| Cisalhamento kN | 1,8 |
| Superfície dos componentes | sem tratamento superficial |
| Força de retenção N | 150 |
Product Variations
| Model | Material | Finishing | H2 | T | H | H1 | D | D3 | Força de aperto N | Constância térmica | D2 | D5 | D4 | D8 | D7 | D6 | T2 | T1 | D1 | M | Material dos componentes | Denominação | Força de extração F kN | Cisalhamento kN | Superfície dos componentes | Força de retenção N | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1561.114 PAK1561.114 | Stainless steel | Natural | 5,5 | 6 | 23 | 6,5 | 6 | 25 | 7 | ≤200 °C | 25 | 14 | 21 | 2,4 | 4,4 | 26 | 2,5 | 6-10 | 14 | M2x3 | aço inoxidável | Fecho rotativo de aperto | 0,25 | 1,1 | sem tratamento superficial | 110 | |||
| PAK1561.118 PAK1561.118 | Stainless steel | Natural | 5,5 | 6 | 28 | 10 | 8 | 34 | 9 | ≤200 °C | 34 | 18 | 28 | 3,4 | 6,5 | 35 | 2,5 | 6-14 | 18 | M3x4 | aço inoxidável | Fecho rotativo de aperto | 0,4 | 1,8 | sem tratamento superficial | 150 | |||
PAK1561.114
Rotary clamping latch, D1=14, Untreated stainless steel, Components: untreated stainless steel
Material = Stainless steel
Finishing = Natural
H2 = 5,5
T = 6
H = 23
H1 = 6,5
D = 6
D3 = 25
Força de aperto N = 7
Constância térmica = ≤200 °C
D2 = 25
D5 = 14
D4 = 21
D8 = 2,4
D7 = 4,4
D6 = 26
T2 = 2,5
T1 = 6-10
D1 = 14
M = M2x3
Material dos componentes = aço inoxidável
Denominação = Fecho rotativo de aperto
Força de extração F kN = 0,25
Cisalhamento kN = 1,1
Superfície dos componentes = sem tratamento superficial
Força de retenção N = 110
PAK1561.118
Rotary clamping latch, D1=18, Untreated stainless steel, Components: untreated stainless steel
Material = Stainless steel
Finishing = Natural
H2 = 5,5
T = 6
H = 28
H1 = 10
D = 8
D3 = 34
Força de aperto N = 9
Constância térmica = ≤200 °C
D2 = 34
D5 = 18
D4 = 28
D8 = 3,4
D7 = 6,5
D6 = 35
T2 = 2,5
T1 = 6-14
D1 = 18
M = M3x4
Material dos componentes = aço inoxidável
Denominação = Fecho rotativo de aperto
Força de extração F kN = 0,4
Cisalhamento kN = 1,8
Superfície dos componentes = sem tratamento superficial
Força de retenção N = 150