PAK2256.118
Rotary clamping latch, heavy-duty version, D=8, H=48, Stainless steel A2 untreated, Components: stainless steel A2 untreated surface
Estimated delivery: On request
Rotary clamping latches are used for quick and easy replacement and closing of devices or covers.
Tool-free clamping reduces set-up time.
Material:
Stainless steel housing.
Rotary knob in PA (polyamide) thermoplastic or stainless steel.
Version:
Housing, untreated surface.
Glass-fibre-reinforced PA rotary knob, black.
Stainless steel rotary knob, untreated surface.
Order example:
K2256.18
Note:
The M2 or M3 stainless steel fastening screws are included in the scope of delivery.
The plate thickness varies depending on the use of different guide pins (K2257).
Mounting option 1 with guide pin form A for plate thickness of 6 mm or with guide pin form B for plate thickness of 9 mm.
Mounting option 2 with clamping pin form A for plate thickness > 6 to 20 mm or with clamping pin form B for plate thickness > 9 to 20 mm.
The guide pin must be ordered separately.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Make sure that the rotary knob is in the OFF position.
Install the latch over the guide pin and turn the knob to the ON position.
Accessories:
Stainless steel guide pin for rotary clamping latches (on/off model) K2257.
Drawing note:
1) Mounting option 1
2) Mounting option 2
3) Plate
Tool-free clamping reduces set-up time.
Material:
Stainless steel housing.
Rotary knob in PA (polyamide) thermoplastic or stainless steel.
Version:
Housing, untreated surface.
Glass-fibre-reinforced PA rotary knob, black.
Stainless steel rotary knob, untreated surface.
Order example:
K2256.18
Note:
The M2 or M3 stainless steel fastening screws are included in the scope of delivery.
The plate thickness varies depending on the use of different guide pins (K2257).
Mounting option 1 with guide pin form A for plate thickness of 6 mm or with guide pin form B for plate thickness of 9 mm.
Mounting option 2 with clamping pin form A for plate thickness > 6 to 20 mm or with clamping pin form B for plate thickness > 9 to 20 mm.
The guide pin must be ordered separately.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Make sure that the rotary knob is in the OFF position.
Install the latch over the guide pin and turn the knob to the ON position.
Accessories:
Stainless steel guide pin for rotary clamping latches (on/off model) K2257.
Drawing note:
1) Mounting option 1
2) Mounting option 2
3) Plate
| Material | Stainless steel 304 |
|---|---|
| Finishing | Natural |
| H2 | 5,5 |
|---|---|
| T | 6/9 |
| H | 48 |
| H1 | 16 |
| D | 8 |
| D3 | 40 |
| Força de retenção N | 750 |
| Força de aperto N | 250 |
| Constância térmica | ≤180 °C |
| D2 | 34 |
| D5 | 18 |
| D4 | 28 |
| D8 | 3,4 |
| D7 | 6,5 |
| D6 | 35 |
| T2 | 2,5 |
| T1 | 6-20/9-20 |
| D1 | 18 |
| M | M3x5 |
| Versão 1 | versão pesada |
| Material dos componentes | aço inoxidável A2 |
| Denominação | Fecho rotativo de aperto |
| Força de extração F kN | 2,4 |
| Superfície dos componentes | sem tratamento superficial |
Product Variations
| Model | Material | Finishing | H2 | T | H | H1 | D | D3 | Força de retenção N | Força de aperto N | Constância térmica | D2 | D5 | D4 | D8 | D7 | D6 | T2 | T1 | D1 | M | Versão 1 | Material dos componentes | Denominação | Força de extração F kN | Superfície dos componentes | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2256.114 PAK2256.114 | Stainless steel 304 | Natural | 5,5 | 6/9 | 40 | 14,7 | 6 | 30 | 450 | 150 | ≤130 °C | 25 | 14 | 21 | 2,4 | 4,4 | 26 | 2,5 | 6-20/9-20 | 14 | M2x4 | versão pesada | aço inoxidável A2 | Fecho rotativo de aperto | 1,8 | sem tratamento superficial | |||
| PAK2256.118 PAK2256.118 | Stainless steel 304 | Natural | 5,5 | 6/9 | 48 | 16 | 8 | 40 | 750 | 250 | ≤180 °C | 34 | 18 | 28 | 3,4 | 6,5 | 35 | 2,5 | 6-20/9-20 | 18 | M3x5 | versão pesada | aço inoxidável A2 | Fecho rotativo de aperto | 2,4 | sem tratamento superficial | |||
PAK2256.114
Rotary clamping latch, heavy-duty version, D=6, H=40, Stainless steel A2 untreated, Components: stainless steel A2 untreated surface
Material = Stainless steel 304
Finishing = Natural
H2 = 5,5
T = 6/9
H = 40
H1 = 14,7
D = 6
D3 = 30
Força de retenção N = 450
Força de aperto N = 150
Constância térmica = ≤130 °C
D2 = 25
D5 = 14
D4 = 21
D8 = 2,4
D7 = 4,4
D6 = 26
T2 = 2,5
T1 = 6-20/9-20
D1 = 14
M = M2x4
Versão 1 = versão pesada
Material dos componentes = aço inoxidável A2
Denominação = Fecho rotativo de aperto
Força de extração F kN = 1,8
Superfície dos componentes = sem tratamento superficial
PAK2256.118
Rotary clamping latch, heavy-duty version, D=8, H=48, Stainless steel A2 untreated, Components: stainless steel A2 untreated surface
Material = Stainless steel 304
Finishing = Natural
H2 = 5,5
T = 6/9
H = 48
H1 = 16
D = 8
D3 = 40
Força de retenção N = 750
Força de aperto N = 250
Constância térmica = ≤180 °C
D2 = 34
D5 = 18
D4 = 28
D8 = 3,4
D7 = 6,5
D6 = 35
T2 = 2,5
T1 = 6-20/9-20
D1 = 18
M = M3x5
Versão 1 = versão pesada
Material dos componentes = aço inoxidável A2
Denominação = Fecho rotativo de aperto
Força de extração F kN = 2,4
Superfície dos componentes = sem tratamento superficial