PAK1562.11
Rotary clamping latch with head, Form A for one plate thickness, D=6, Untreated stainless steel, Components: steel
Estimated delivery: On request
Compression latches are used for quick and easy replacement and closing of devices or covers.
Tool-free clamping reduces set-up time.
Material:
Stainless steel housing and push button.
Version:
Housing and push button, untreated surface.
Note:
Form A for plates with thicknesses from 3 to 10 mm.
Form B for plates with thicknesses from 3 to 27 mm.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Install the compression latch over the guide pin without pressing the button.
The clamping process is automatic.
To release, press the button and remove the compression latch.
Application:
Mounting option A in combination with spacer rings: ideal for plates with thicknesses from 3 to 10 mm.
Mounting option B: ideal for plates with thicknesses from 10 to 27 mm.
Attention:
The pull-out forces stated are only valid in combination with the guide pins K1564.
Accessories:
Spacer rings K1563.
Guide pin K1564.
Drawing note:
1) Plate
Tool-free clamping reduces set-up time.
Material:
Stainless steel housing and push button.
Version:
Housing and push button, untreated surface.
Note:
Form A for plates with thicknesses from 3 to 10 mm.
Form B for plates with thicknesses from 3 to 27 mm.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Install the compression latch over the guide pin without pressing the button.
The clamping process is automatic.
To release, press the button and remove the compression latch.
Application:
Mounting option A in combination with spacer rings: ideal for plates with thicknesses from 3 to 10 mm.
Mounting option B: ideal for plates with thicknesses from 10 to 27 mm.
Attention:
The pull-out forces stated are only valid in combination with the guide pins K1564.
Accessories:
Spacer rings K1563.
Guide pin K1564.
Drawing note:
1) Plate
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| H2 | 8,5 |
|---|---|
| SW | 17 |
| L | 9,5 |
| T | 3 |
| H | 23 |
| H1 | 15,5 |
| D | 6 |
| D3 | 11 |
| D2 | 32 |
| D1 | 19 |
| M | M16X1 |
| Forma | A |
| Versão 1 | com cabeça |
| Material dos componentes | aço inoxidável |
| Denominação | Fecho rotativo de aperto |
| Superfície dos componentes | sem tratamento superficial |
| Cisalhamento kN | 1,1 |
| Força de extração F kN | 0,25 |
| Constância térmica | ≤180 °C |
| Força de aperto N | 6 |
| Tipo de forma | para uma espessura de placa de 3–10 mm |
| Força de retenção N | 100 |
Product Variations
| Model | Material | Finishing | H2 | SW | L | T | H | H1 | D | D3 | D2 | D1 | M | Forma | Versão 1 | Material dos componentes | Denominação | Superfície dos componentes | Cisalhamento kN | Força de extração F kN | Constância térmica | Força de aperto N | Tipo de forma | Força de retenção N | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1562.11 PAK1562.11 | Stainless steel | Natural | 8,5 | 17 | 9,5 | 3 | 23 | 15,5 | 6 | 11 | 32 | 19 | M16X1 | A | com cabeça | aço inoxidável | Fecho rotativo de aperto | sem tratamento superficial | 1,1 | 0,25 | ≤180 °C | 6 | para uma espessura de placa de 3–10 mm | 100 | |||
PAK1562.11
Rotary clamping latch with head, Form A for one plate thickness, D=6, Untreated stainless steel, Components: steel
Material = Stainless steel
Finishing = Natural
H2 = 8,5
SW = 17
L = 9,5
T = 3
H = 23
H1 = 15,5
D = 6
D3 = 11
D2 = 32
D1 = 19
M = M16X1
Forma = A
Versão 1 = com cabeça
Material dos componentes = aço inoxidável
Denominação = Fecho rotativo de aperto
Superfície dos componentes = sem tratamento superficial
Cisalhamento kN = 1,1
Força de extração F kN = 0,25
Constância térmica = ≤180 °C
Força de aperto N = 6
Tipo de forma = para uma espessura de placa de 3–10 mm
Força de retenção N = 100