PAK1733.300609
Side-thrust plunger with spring, increased spring force D=10, D2=9, 9, L1=10, 3, Plastic green, Components: steel, L=9, D1=6
Estimated delivery: On request
Material:
Plastic bush and spring.
Steel pressure pin.
Version:
Case-hardened and burnished pressure pin.
Note:
Side-thrust spring plungers are used for positioning, locating, holding and clamping workpieces in applications where dirt can accumulate.
For example: painting and sandblasting.
Calculation of dimension X:
Y > = L1-D1/2, then X = D1/2-S.
Y < L1-D1/2, then X = D1/2-S-([L1-D1/2-Y]*0,123)
Light spring force = blue spring
Standard spring force = red spring
Heavy spring force = green spring
Mounting:
The bush is pressed into the bore.
It is recommended to moisten the bush before assembly.
Drawing note:
1) Mounting tool
2) Some sizes have a differing elongated tip
Y = Workpiece height
W = Workpiece length
X = Coordinate dimension
Z = Stop diameter
Plastic bush and spring.
Steel pressure pin.
Version:
Case-hardened and burnished pressure pin.
Note:
Side-thrust spring plungers are used for positioning, locating, holding and clamping workpieces in applications where dirt can accumulate.
For example: painting and sandblasting.
Calculation of dimension X:
Y > = L1-D1/2, then X = D1/2-S.
Y < L1-D1/2, then X = D1/2-S-([L1-D1/2-Y]*0,123)
Light spring force = blue spring
Standard spring force = red spring
Heavy spring force = green spring
Mounting:
The bush is pressed into the bore.
It is recommended to moisten the bush before assembly.
Drawing note:
1) Mounting tool
2) Some sizes have a differing elongated tip
Y = Workpiece height
W = Workpiece length
X = Coordinate dimension
Z = Stop diameter
| Material | Plastic |
|---|---|
| Color | Green |
| ±S | 1 |
|---|---|
| F aprox. N | 60 |
| L | 9 |
| D | 10 |
| D2 | 9,9 |
| L1 | 10,3 |
| D1 | 6 |
| Versão 1 | Força de mola aumentada |
| Material dos componentes | aço |
| Denominação | Posicionador de mola de efeito lateral |
| Superfície dos componentes | endurecido e brunido |
