PAK1733.220409
Side-thrust plunger with spring, standard spring force D=8, D2=7, 9, L1=5, 2, Red plastic, Components: POM/polyacetal, L=9
Estimated delivery: On request
Material:
Plastic bush and spring.
POM pressure pin
Version:
Pressure pin in white.
Note:
Side-thrust spring plungers are used for positioning, locating, holding and clamping workpieces in applications where dirt can accumulate.
For example: painting and sandblasting.
Calculation of dimension X:
Y > = L1-D1/2, then X = D1/2-S.
Y < L1-D1/2, then X = D1/2-S-([L1-D1/2-Y]*0,123)
Light spring force = blue spring
Standard spring force = red spring
Heavy spring force = green spring
Mounting:
The bush is pressed into the bore.
It is recommended to moisten the bush before assembly.
Drawing note:
1) Mounting tool
2) Some sizes have a differing elongated tip
Y = Workpiece height
W = Workpiece length
X = Coordinate dimension
Z = Stop diameter
Plastic bush and spring.
POM pressure pin
Version:
Pressure pin in white.
Note:
Side-thrust spring plungers are used for positioning, locating, holding and clamping workpieces in applications where dirt can accumulate.
For example: painting and sandblasting.
Calculation of dimension X:
Y > = L1-D1/2, then X = D1/2-S.
Y < L1-D1/2, then X = D1/2-S-([L1-D1/2-Y]*0,123)
Light spring force = blue spring
Standard spring force = red spring
Heavy spring force = green spring
Mounting:
The bush is pressed into the bore.
It is recommended to moisten the bush before assembly.
Drawing note:
1) Mounting tool
2) Some sizes have a differing elongated tip
Y = Workpiece height
W = Workpiece length
X = Coordinate dimension
Z = Stop diameter
| Material | Plastic |
|---|---|
| Color | Red |
| ±S | 0,6 |
|---|---|
| F aprox. N | 30 |
| L | 9 |
| D | 8 |
| D2 | 7,9 |
| L1 | 5,2 |
| D1 | 4 |
| Versão 1 | Força de mola padrão |
| Material dos componentes | POM (Poliacetal) |
| Denominação | Posicionador de mola de efeito lateral |
