PAK0374.410
Side-thrust spring plunger, standard spring, Single-sided, D=10 L=30, Style C, Free-cutting steel, Burnished, Components: steel
Estimated delivery: On request
Material:
Body in free-cutting steel.
Steel ball.
Spring in plastic.
Version:
Burnished body.
Ball with untreated surface.
Note:
The side-acting plunger must be pressed into the bore by a minimum of L3. It is used for positioning and pressing small parts in fixtures. During mechanical machining of a workpiece, it may be necessary to additionally secure it with another clamping means. When storing devices, make sure that the plastic spring is not under load.
The spring force indicated represents a statistical average value.
Drawing note:
2) Punch
Body in free-cutting steel.
Steel ball.
Spring in plastic.
Version:
Burnished body.
Ball with untreated surface.
Note:
The side-acting plunger must be pressed into the bore by a minimum of L3. It is used for positioning and pressing small parts in fixtures. During mechanical machining of a workpiece, it may be necessary to additionally secure it with another clamping means. When storing devices, make sure that the plastic spring is not under load.
The spring force indicated represents a statistical average value.
Drawing note:
2) Punch
| Material | Free-cutting steel |
|---|---|
| Finishing | Burnished |
| B | 4,5 |
|---|---|
| D1 | 5,5 |
| L2 | 7 |
| L3 | 8 |
| Furo de alojamento H8 | 10 |
| Forma | C |
| Material dos componentes | aço |
| Denominação | Posicionador de mola de efeito lateral |
| Força de mola final F2 aprox. N | 170 |
| Força de mola inicial F1 aprox. N | 60 |
| L | 30 |
| D | 10 |
| H | 1 |
| Versão 1 | unilateral |
| Força de mola | padrão |
