PAK0374.108
Side-thrust spring plunger, standard spring, Single-sided, D=8 L=25, Style B, Free-cutting steel, Burnished
Estimated delivery: On request
Material:
Body in free-cutting steel.
POM (polyacetal) ball.
Spring in stainless steel.
Version:
Burnished body.
Ball with untreated surface.
Note:
The side-acting plunger must be pressed into the bore by a minimum of L3. It is used for positioning and pressing small parts in fixtures. During mechanical machining of a workpiece, it may be necessary to additionally secure it with another clamping means. When storing devices, make sure that the plastic spring is not under load.
The spring force indicated represents a statistical average value.
Drawing note:
1) Serration
2) Punch
Body in free-cutting steel.
POM (polyacetal) ball.
Spring in stainless steel.
Version:
Burnished body.
Ball with untreated surface.
Note:
The side-acting plunger must be pressed into the bore by a minimum of L3. It is used for positioning and pressing small parts in fixtures. During mechanical machining of a workpiece, it may be necessary to additionally secure it with another clamping means. When storing devices, make sure that the plastic spring is not under load.
The spring force indicated represents a statistical average value.
Drawing note:
1) Serration
2) Punch
| Material | Free-cutting steel |
|---|---|
| Finishing | Burnished |
| L2 | 3,6 |
|---|---|
| D1 | 3 |
| Furo de alojamento H8 | 8 |
| B | 3,2 |
| L3 | 6 |
| Forma | B |
| Material dos componentes | poliacetal |
| Denominação | Posicionador de mola de efeito lateral |
| Força de mola final F2 aprox. N | 6,5 |
| Força de mola inicial F1 aprox. N | 2,5 |
| L | 25 |
| H | 0,7 |
| D | 8 |
| Versão 1 | unilateral |
| Força de mola | padrão |
