PAK0370.32066
Side-thrust spring plunger, Standard spring without thrust pin, Form B with seal D=10, L1=7, 5, Aluminium
Estimated delivery: On request
Material:
Aluminium bush. Receiving disc in steel. Spring in steel.
Version:
Blue zinc-plated bush.
Note:
Depending on the type of application, the pressure pin can be made in-house and screwed into the threaded hole of the receiving disc.
By using the stroke (S) and its corresponding length (L1), the corresponding lateral pressure (F) can be achieved.
Form B is additionally equipped with a seal against the ingress of chips and dirt.
Aluminium bush. Receiving disc in steel. Spring in steel.
Version:
Blue zinc-plated bush.
Note:
Depending on the type of application, the pressure pin can be made in-house and screwed into the threaded hole of the receiving disc.
By using the stroke (S) and its corresponding length (L1), the corresponding lateral pressure (F) can be achieved.
Form B is additionally equipped with a seal against the ingress of chips and dirt.
| Material | Aluminum |
|---|
| F aprox. N | 75 |
|---|---|
| S | 2 |
| L | 12 |
| D | 10 |
| D2 | 10 |
| D1 | M4 |
| L1 | 7,5 |
| Forma | B |
| Versão 1 | sem pino de pressão |
| Material dos componentes | aço |
| Denominação | Posicionador de mola de efeito lateral |
| Versão 2 | com vedante |
| Força de mola | padrão |
