Sliding profile with clamping lever, Form L floating bearing, Zinc die-cast, Components: POM (polyacetal) D=M05

Material:
Main body: zinc die-cast
Sliding elements: POM plastic.
Mounting parts: zinc-plated steel.
O-ring: EPDM.
Clamping lever: glass fibre reinforced plastic.
Mechanical clamping lever: steel.
Note:
Metal sliding profile with cut-outs for plastic sliding polymers. With additional clamping lever on the carriage system fastener. Sliding profiles allow low-wear linear movement of type I aluminium profiles with a 8 mm slot. The absence of lubrication makes the system extremely resistant to dirt.

The maximum permissible load for a sliding profile corresponds to Fmax. = 50 N. The holding force at a maximum tightening torque of 15 Nm corresponds to 600 N.

Slide guides with several sliding flanges must be designed as a combination of fixed bearing (form F) and floating bearing (form L). This compensates for form tolerances and ensures easier movement.

Form S: the connection of a set of additional elements can be freely selected.

Form L: set for use as a floating bearing.

Form F: set for use as a fixed bearing.
Scope of delivery:
Form S: profile slide with sliding elements.
2 hexagon nuts DIN 439 B - M6.
1 clamping lever M6x55 with washer DIN 9021 6,4 mm and special nuts with groove 8 - M6.

Form L: profile slide with sliding elements.
2 raised head screws ISO 7380 - M5x25.
2 o-rings DIN 3771 - 5x1,5.
2 nuts, slot 8 - M5.
1 clamping lever M6x55 with washer DIN 9021 6,4 mm and special nuts with groove 8 - M6.

Form F: profile slide with sliding elements.
2 raised head screws ISO 7380 - M6x25.
2 o-rings DIN 3771 - 5x1,5.
2 nuts, slot 8 - M6.
1 clamping lever M6x55 with washer DIN 9021 6,4 mm and special nuts with groove 8 - M6.