Spring latch with retractable cable, Style A with locking, S=2-12, Stainless steel A4 1.4401 polished

Material:
Stainless steel 1.4401.

Version:
ground and polished or matt blasted.
Note:
These latches with recessed handles are designed for flush mounting in doors, flaps and hoods.
Available in two different sizes for different door leaf thicknesses. Variants with key allow additional locking. The locks have identical keying, which means that all cylinders can be opened with the same key.
The pre-fixed handle prevents knocking during retraction.

Torque max. for tightening the screws: 2,4 Nm.

Form A: with key
Form B: without key
Operating mode:
When the grip is pulled, the latch is moved to the "open" position, allowing the door to be opened.
Locking takes place automatically when the door is slammed shut. The latch can also be operated from the rear.
Application:
- Automotive industry
- Mechanical engineering
- Boat and ship building
- Aerospace industry
- Motorhomes and caravanning
- Medical technology
Mounting:
1. Make the mounting cut-out according to the sketch.
2. Install the mounting angle bracket.
3. Fasten the rear section with mounting parts.
Scope of delivery:
The mounting bracket with the appropriate screws (M4) and the angle bracket are included in the scope of supply.
Locking push latches are supplied with 2 keys each.
The screws (M5) for the mounting angle bracket are not included in the scope of delivery.
Drawing note:
1) Door leaf
2) Frame
3) Loop handle
4) Mounting angle bracket
5) Height of the mounting bracket (see table H7)
6) Cut-out for mounting