PAK0656.5082
Spring plunger, standard spring, With condition sensor, Normally open D=M08, L=29, L1=3, Steel, Burnished
Estimated delivery: On request
In addition to their mechanical function as a latching and positioning element, spring plungers with status sensor are used to detect whether or not a component is in the desired position.
The sensor detects whether the pressure pin is retracted or extended and allows this status information to be processed electronically.
Material:
Steel bush, pressure pin and spring.
Stainless steel status sensor.
Version:
burnished part. Hardened pressure pin.
Order example:
K0656.5081
Note:
The condition sensor is switched at a stroke equal to H.
Application:
Thrust plungers with condition sensors enable status-dependent process control. It is possible to ensure that a workpiece or a moving component is in the desired position before proceeding to further steps.
Temperature range:
Temperature range: -25° C - +70°C
Technical data:
Inductive sensor:
Output circuit: PNP normally open contact (NO) or normally closed contact (NC)
Operating voltage: 10 - 30 V DC
Operating current:
The sensor detects whether the pressure pin is retracted or extended and allows this status information to be processed electronically.
Material:
Steel bush, pressure pin and spring.
Stainless steel status sensor.
Version:
burnished part. Hardened pressure pin.
Order example:
K0656.5081
Note:
The condition sensor is switched at a stroke equal to H.
Application:
Thrust plungers with condition sensors enable status-dependent process control. It is possible to ensure that a workpiece or a moving component is in the desired position before proceeding to further steps.
Temperature range:
Temperature range: -25° C - +70°C
Technical data:
Inductive sensor:
Output circuit: PNP normally open contact (NO) or normally closed contact (NC)
Operating voltage: 10 - 30 V DC
Operating current:
| Material | Steel |
|---|---|
| Finishing | Burnished |
| Thread | M8 |
| Força de mola final F2 aprox. N | 30 |
|---|---|
| Força de mola inicial F1 aprox. N | 15 |
| D | M8 |
| L | 29 |
| VPE | 1 |
| D1 | 4 |
| Forma do posicionador | pino de pressão |
| Perfil de arrasto | sensor de proximidade |
| Versão 2 | normalmente aberto |
| Versão 1 | com sensor de condição |
| Material dos componentes | pino em aço |
| Denominação | Posicionador de mola |
| H | 2 |
| L1 | 3 |
| Força de mola | padrão |
| P | 2000 |
