PAK0582.05
Spring plunger, standard spring, With retaining ring, D=4, 95 L=5, Stainless steel, Components: stainless steel ball
Estimated delivery: On request
Material:
Stainless steel bush, spring and ball.
NBR O-ring.
Version:
Bush and ball, untreated surface.
Hardened ball.
Black O-ring.
Order example:
K0582.05
Note:
Spring plungers with retaining ring are suitable for "upside-down" mounting or for use in installation situations with difficult access.
They can be inserted directly by hand, with the fingers or by means of simple mounting aids into the respective receiving bores. An O-ring provides
the required adhesion, protecting the plunger against possible falls. Further components can be assembled without any additional auxiliary tools.
Stainless steel bush, spring and ball.
NBR O-ring.
Version:
Bush and ball, untreated surface.
Hardened ball.
Black O-ring.
Order example:
K0582.05
Note:
Spring plungers with retaining ring are suitable for "upside-down" mounting or for use in installation situations with difficult access.
They can be inserted directly by hand, with the fingers or by means of simple mounting aids into the respective receiving bores. An O-ring provides
the required adhesion, protecting the plunger against possible falls. Further components can be assembled without any additional auxiliary tools.
| Material | Stainless steel |
|---|
| D2 | 4 |
|---|---|
| Força de mola inicial F1 aprox. N | 3 |
| L2 | 0,7 |
| L1 | 1 |
| L3 | 2,3 |
| D3 | 5 |
| Força de mola final F2 aprox. N | 7 |
| L | 5 |
| D | 4,95 |
| D4 | 4,1 |
| D1 | 3 |
| L4 | 0,7 |
| Forma do posicionador | esfera |
| Versão 1 | com anel de retenção |
| Material dos componentes | esfera em aço inoxidável |
| Denominação | Posicionador de mola |
| H | 0,8 |
| Força de mola | padrão |
