PAK1380.10
Spring plunger with standard spring force D=M10 L=22 stainless steel, Flat with thread locking, Components: pin steel
Estimated delivery: On request
Material:
Bush 1.4305.
Pressure pin 1.4034.
Spring 1.4310.
Thread-locking element in nylon.
Version:
untreated surface.
Hardened pressure pin.
Order example:
K1380.16
Note:
This plunger is used mainly as an ejector pin and damping stop in tool making.
The pin is actuated in the axial direction.
Drawing note:
L2 = approx. two thread pitches
1) Bonded threaded pin
Bush 1.4305.
Pressure pin 1.4034.
Spring 1.4310.
Thread-locking element in nylon.
Version:
untreated surface.
Hardened pressure pin.
Order example:
K1380.16
Note:
This plunger is used mainly as an ejector pin and damping stop in tool making.
The pin is actuated in the axial direction.
Drawing note:
L2 = approx. two thread pitches
1) Bonded threaded pin
| Material | Stainless steel |
|---|---|
| Thread | M10 |
| Forma do posicionador | pino de pressão plano |
|---|---|
| Perfil de arrasto | sextavado interior |
| Versão 2 | plano com trava-roscas |
| Versão 1 | Força de mola padrão |
| Material dos componentes | pino em aço inoxidável |
| Denominação | Posicionador de mola |
| H | 3 |
| Binário de desaperto aprox. Nm | 0,6 |
| T1 | 1,4 |
| D1 | 4 |
| Força de mola inicial F1 aprox. N | 8 |
| Força de mola final F2 aprox. N | 31 |
| Chave para montagem g | 50 |
| Binário de aparafusamento aprox. Nm | 1,3 |
| S | 3 |
| D | M10 |
| L | 22 |
| L1 | 9 |
| N | 1,6 |
