PAK1382.12
Spring plunger with standard spring force D=M12 L=28 stainless steel, Flat with thread locking, Components: pin
Estimated delivery: On request
Material:
Stainless steel bush 1.4305.
POM pressure pin.
Spring in stainless steel 1.4310.
Thread-locking element in nylon.
Version:
Untreated surface.
Order example:
K1382.16
Note:
This plunger is used mainly as an ejector pin and damping stop in tool making.
The pin is actuated in the axial direction.
Drawing note:
L2 = approx. two thread pitches
1) Bonded threaded pin
Stainless steel bush 1.4305.
POM pressure pin.
Spring in stainless steel 1.4310.
Thread-locking element in nylon.
Version:
Untreated surface.
Order example:
K1382.16
Note:
This plunger is used mainly as an ejector pin and damping stop in tool making.
The pin is actuated in the axial direction.
Drawing note:
L2 = approx. two thread pitches
1) Bonded threaded pin
| Material | Stainless steel |
|---|---|
| Thread | M12 |
| Forma do posicionador | pino de pressão plano |
|---|---|
| Perfil de arrasto | sextavado interior |
| Versão 2 | plano com trava-roscas |
| Versão 1 | Força de mola padrão |
| Material dos componentes | posicionador POM |
| Denominação | Posicionador de mola |
| H | 4 |
| Binário de desaperto aprox. Nm | 1,3 |
| T1 | 2 |
| D1 | 6 |
| Força de mola inicial F1 aprox. N | 10 |
| Força de mola final F2 aprox. N | 47 |
| Chave para montagem g | 70 |
| Binário de aparafusamento aprox. Nm | 2 |
| S | 4 |
| D | M12 |
| L | 28 |
| L1 | 10 |
| N | 2 |
