PAK1373.16
Spring plunger with standard spring force D=M16 L=32 burnished steel, Flat with thread locking, Components: pin
Estimated delivery: On request
Material:
Steel bush with strength class 5.8.
POM pressure pin.
Spring in spring steel cl. D.
Thread-locking element in nylon.
Version:
burnished part.
Order example:
K1373.16
Note:
This plunger is used mainly as an ejector pin and damping stop in tool making.
The pin is actuated in the axial direction.
Drawing note:
L2 = approx. two thread pitches
1) Bonded threaded pin
Steel bush with strength class 5.8.
POM pressure pin.
Spring in spring steel cl. D.
Thread-locking element in nylon.
Version:
burnished part.
Order example:
K1373.16
Note:
This plunger is used mainly as an ejector pin and damping stop in tool making.
The pin is actuated in the axial direction.
Drawing note:
L2 = approx. two thread pitches
1) Bonded threaded pin
| Material | Steel |
|---|---|
| Finishing | Burnished |
| Thread | M16 |
| Forma do posicionador | pino de pressão plano |
|---|---|
| Perfil de arrasto | sextavado interior |
| Versão 2 | plano com trava-roscas |
| Versão 1 | Força de mola padrão |
| Material dos componentes | posicionador POM |
| Denominação | Posicionador de mola |
| H | 5 |
| Binário de desaperto aprox. Nm | 3 |
| T1 | 2,5 |
| D1 | 7,5 |
| Força de mola inicial F1 aprox. N | 45 |
| Força de mola final F2 aprox. N | 100 |
| Chave para montagem g | 100 |
| Binário de aparafusamento aprox. Nm | 3,9 |
| S | 5 |
| D | M16 |
| L | 32 |
| L1 | 14 |
| N | 2,5 |
