Support pin with support sensor D1=30, D2=20, H=30, Hardened steel case-hardened, Burnished, Ground, Components: stainless steel

Smart Products offer the added value of being able to detect electronically the actuation status of various clamping and support elements.

The locating pins can be used as a support, stop or locator for workpieces to be machined.
A limit switch integrated in the locating pin with contact sensor detects whether a workpiece is in contact or not.

If the locating pin is connected to the Bluetooth module K1831 via the integrated USB type C port, it transmits the sensor status via wireless connection. The signal can then be received and processed, for example, by the gateway K1494.
In addition, the integrated LED display of the Bluetooth module indicates the status of the locating pin.

The locating pin is supplied with power via the Bluetooth module, which can be replaced if necessary without reconfiguration.
Material:
Locating pin, hardened steel.
Stainless steel contact sensor.
Steel plug housing.
Version:
Locating pin, burnished, hardened and ground.
Burnished plug housing.
Order example:
K1832.1630
Note:
Reliable signal transmission can only be guaranteed if the contact sensor is pressed down by the workpiece, aligned with the contact surface. The tolerance is 0,2 mm.

The contact surface of the workpiece must be greater than Ø10 mm.
Application:
With the locating pin, the positioning of the workpieces can be monitored. The locating pins can also be used as a stop with position detection.
Temperature range:
0 °C to +65 °C.
Accessories:
Bluetooth module K1831.
Gateway K1494.
Technical data:
See Downloads, Technical note.
Safety:
Locating pins with contact sensor are not suitable for personal protection.
Drawing note:
1) Contact sensor
2) USB Type-C port